@the_network_guys: Happens to the best of us. #networkengineer #fibreoptics #datacentre #thenetworkguys

The Network Guys
The Network Guys
Open In TikTok:
Region: GB
Tuesday 10 March 2026 16:49:07 GMT
450451
19204
442
1221

Music

Download

Comments

romannoori09
Roman ✪ :
Switch> enable Switch# configure terminal Switch(config)# interface gigabitethernet 0/1 Switch(config-if)# switchport trunk allowed vlan (add) 20 Switch(config-if)# end Switch# show interfaces trunk
2026-03-11 01:45:10
712
leeerooooyjenkins
Eloy :
im a junior, is the magic word 'please'?
2026-03-10 17:58:00
774
itcuteph
NetGuide :
“Switch port trunk allowed vlan add” 😂 it happened to me and all vlan got deleted in trunk and replace with 1 vlan😂😂
2026-03-11 00:38:15
364
rasheed..._
Rasheed..._ :
the other day I almost locked myself out of my system while configuring the firewall.
2026-06-05 02:46:58
7
yung.x17
X :
Never had this issue with UniFi ✅
2026-03-11 00:18:07
95
haxxor7
Doppler :
Is it allowed vlan 20 or allowed add 20?im so confused on this one
2026-06-02 03:04:02
1
ellisfrh
ellis :
switchport trunk allowed vlan…
2026-03-10 17:25:17
234
woeschratte
𝔠𝔥𝔞𝔯𝔩𝔦𝔢 :
i don't understand how people can do networking all day, but i sure appreciate them 😭
2026-03-10 18:03:35
51
tommmmmyd
T.Smoke275 :
yeah, we know that Cisco cli has some dumb traps
2026-03-10 20:39:44
47
rafa3l309
Rafa ❌ :
Not vlans but I spent close to three days troubleshooting two switches not talking to each other, forgot this obscure command: service unsupported-transceiver
2026-03-11 20:30:39
19
pencilus93
Pencilus :
If you aren't backing up config before changes I have no pitty for you.
2026-03-10 22:23:18
19
captechion
Cápa :
vlan filtering?
2026-03-10 19:42:15
0
ionbytesec
Ion Bytes :
Once I deleted an access list without removing it from the interface first, long story short an oil company lost connectivity to all remote sites in the jungle region of my country.
2026-05-03 13:07:41
8
captainclosecall
Captain Close-call :
i fix this my always just re entering every vlan i want on that port in 1 command. works every time. if it has 20,30,40 and i want to add 50 switchport trunk allowed vlan 20,30,40,50 🤣
2026-03-11 02:34:38
6
gabby.11s
Gabs :
😂😂 It happens at least one in your life… thats the way you learn the importance of the “add” hahaha
2026-03-10 18:54:33
9
maan7111
Manveer :
No shutdown
2026-04-30 17:15:10
6
eaglerelic420
EagleRelic :
juniper doesnt have this problem
2026-03-11 03:00:02
12
datacenterdude
DatacenterDude :
Hopefully you remembered “Reload in 10” before doing it
2026-03-11 20:22:31
10
tiktoktimdk
Tiktoktim :
ADD
2026-03-10 22:05:30
6
warfarellen
Test :
YYEEEY! Network memes on Tiktok!
2026-05-31 16:40:35
1
jonasp_pinguino
JonasP :
no shutdown 😭
2026-05-12 06:01:38
2
bitsbanger
No.1 :
just buy juniper or arista
2026-06-03 19:19:08
1
shocktube_k
🐋Starbuck⚓️ :
I started network and tiktok suddenly shows up these, how come??
2026-04-18 12:55:56
4
thedrun45
Drun :
and you did it on the in side of a remote router in another state/country
2026-03-20 01:26:25
4
mrvankog
m.vankog+tiktok :
OK, apparently it is "add". But why is it bad? Can't you just arrow-up to the last command and add it?
2026-03-10 19:48:07
1
To see more videos from user @the_network_guys, please go to the Tikwm homepage.

Other Videos


About