@soufendfilms: Let’s replace the camshaft position sensor on this single cab aka the captain crunch build ! #chevytrucks #projecttruck #camshaft #truckbuilds #foru

lowfonso :

You’re gon need to swap it to a oem sensor soon gm is picky

ExpiredMilk :

Camshaft sensor on rare occasions indicates a stretched timing chain you should do a full inspection to see if your not out of time

Car Sales Guys :

Did it throw codes? Mine does that takes about 3 cranks to start

KiloTheK9 :

Can this be a cause of an oil leak ? Down the transmission presenting itself as rear main seal ?

Caden :

I replaced mine, on a 5.3 and i get high and low voltage codes. Something about the motor not liking after market sensors..

KOPES™ | Dead Serious :

Isn’t that a crankshaft sensor not a cam sensor the cam sensor on my 5.3 is in the front like a 6.0

mr' ole-skool :

that's the crankshaft broo 😁

CaptainJuju :

It’s crazy that you did this because mine is doing the same exact thing. I appreciate you making a video on this!

wickednative89 :

u need to disconnect the negative an positive if u wanna reset it

pacheco16k :

Show us how to remove and reinstall a motor. Got a 96 gmc sierra with a 5.7 vortec. I wanna swap out

brayden👑🇺🇸 :

I have the same problem and my fuel pressure and purge valve both fine you think that’s the issue?

Goob junior :

My question is why are you using a half inch impact?

456_racingYZ :

Was there ever a engine code I got same problem replaced the crank shaft sensor fuel regulator and fuel filter

Rocha_L5P🦍 :

Sound like the pump is going out 😏

El_NENE_5.7 :

What if my 2008 Tahoe 5.3 turns of while driving and turns back on no problem , Changed fuel pump already any ideas

1321 :

This ur fuel pump

thatoneblackchevy29 :

Need to get long tubes for mine

E :

Eli :

Always do oem sensors unless you can help it anything “aftermarket” on chevys don’t last long if they even work right

Betty_White454 :

Did it throw a code?

𒉭 :

Get a front grille emblem

Lando5.3🛻 :

Aye bro I got the same truck, mines doing the same exact not cranking issue but there’s no code for the camshaft sensor

Juan :

Yo bro I got a problem wit my truck What can cause the truck to crank but not start if I replace spark plugs, wires, battery, fuel pump, coil packs, ecm?

. :

i swapped mine and its struggling to start even more could it be the wires its self?

Paul Ornelas :

U got lucky it was the fuel pump on mine