StonedInTheYard
Region: US
Friday 13 March 2026 01:19:19 GMT
42874
611
48
12
Music
Download
Comments
lane29 :
common sense would tell you to pull the plastic intake manifold off the head instead of pulling the linkage assembly
2026-03-13 04:18:48
24
. :
Double lock nut the stud with the nuts that came off with the air box and pull one stud out and it gives you enough room to pop the linkage off without bending or disassembly of the whole thing
2026-03-13 16:05:18
6
johnboy :
take the 2 bolts going to engine holding intake tube on
2026-04-13 23:15:04
5
cade.king10 :
Next time you should just use a hammer, then you have new content on fixing the stuff you just broke
2026-03-13 19:27:34
4
Karl Peters :
Brother! Put the carb back slightly bend the choke rod should allow you to barley pop the carb off the studs and remove the throttle linkage
2026-03-13 02:37:30
4
Jonathan Gnade :
Take the threaded stubs off the head, twist carb until you can undo the rods 😂
2026-03-21 02:54:23
3
🌾Dylan🌾 :
Your supposed to use the nuts that hold the Air filter assembly on, and jam them together on the long studs and they come out easy
2026-03-24 05:28:58
3
DYE82276 :
You can take the long bolts out. It takes a very small socket like a 9/32. You just made yourself a large mess. lol
2026-04-11 07:38:14
3
bonz :
o boy
2026-04-20 01:39:35
1
Michael Carter :
take the stubs out the intake
2026-04-26 17:07:40
3
DanLeva369 :
It’s a Nikki carb just toss it and get a Walbro.
2026-03-15 03:53:04
4
Dale sr fan :
take fule line off, pull carb off twist it so the linkage can come out 😑
2026-03-13 22:22:01
3
Jesse Dotson :
Damn bro 😂😂
2026-03-15 21:24:14
3
Dylan Brown :
After looking at it for 10 minutes I think this was your better option but what ever works lmao
2026-03-15 13:30:47
3
KINGNATIONWIDE🥀💕 ❤️🔥❤️🌻 :
take the carb bolts out
2026-03-15 03:51:13
2
swartzcustoms1966 :
🤣🤣🤣 it's not rocket science
2026-04-21 19:46:36
2
Aadyn 🦆 :
bro
2026-03-16 15:55:43
1
Preston :
Angle. Grinder.
2026-03-13 01:53:44
6
Will work for tool money :
just pull the bracket off the block like you did then leave the rods attached to that bracket, wiggle bracket every which way you need to in order to get those linkage rods off the carb. Once carb is off, half way bolt the bracket back on. It’ll be ready for ya when you go to install carb back on.
2026-03-13 03:54:02
2
BIZROCK :
Definitely didn’t need to do all that
2026-04-26 11:18:01
0
trashbannedit :
I don't go through all that... I just rewatch my video in reverse after it's off.... 😂
2026-03-13 08:49:52
0
LetMeLiveYourLife :
take the long bolts out that it is sliding on
2026-03-21 17:14:20
1
Collin Floyd :
Double nut the stud and take it out ?
2026-03-13 02:03:59
5
charleszimmerle :
use a pair of small channel locks and take the whole boat out then the carburetor was slide right off
2026-04-19 01:27:40
4
marvindauzat541 :
remove the studs
2026-03-15 22:53:26
2
To see more videos from user @thestone101, please go to the Tikwm
homepage.
