@chaseavondet_: you’d be surprised how often this is done wrong 😅 #injectors #diesel #truck

Nick Bonavenia :

Pop injectors and feed tubes in, this is the proper sequence 1. torque injectors to 44 inch lbs 2. torque feed tube to 11 Foot lbs 3. torque injector to 77 inch lbs 4. torque feed tube to 45 foot lbs

aaron :

Where’d you get the fan shroud

Winston Whitt :

First thing is to have them bench tested!!!!!!!!

Obs.high.country :

Yah my injectors caused cylinder 1and 6 to lose compression🥲 6.7 swap under way

Ryan :

Forgot to mention the 2nd torque on the feed tubes lol

That_one_12v :

You put the injector in then feed tube then torque the injector to 5nm then torque feed tube then back to injectors then feed tube last and your good

appleuser77426569 :

Naaaa that’s all wrong

Dadbod_diesels :

don't forget 2nd torque. but its actually a pretty simple job if you take your time and follow the steps in order.

delirium_6.7 :

I need to know where to get the fan shroud

Karson :

Had a shit set of injectors in my 06 5.9. Had a time crunch to throw my stock set back in, from opening hood to closing hood took 2.5 hours and ran way better. Definitely be careful about the torquing sequence

💸Teegan💸 :

jhofishh :

Holy those injectors seating were satisfying

alex :

you just got a follow sir

Kody Kelly :

Where was the 2nd torque for the feed tubes haha come on now

CPSteveMiller :

Injectors have an initial seat torque. You don't just push them down and torque the feed tube. torque injector to seat torque torque feed tube to seat torque final torque injector final torque feed tube

thomas668067.0 :

👍👍👍

Aidyn Russell :

👑