@scott.industries: Doing a max bed sized print on the Bambu Lab H2S. Ever wondered how much PETG shrinks when it cools. Even after being warped all night, the print was flat as can be after it came of the build plate. #bambulab #3dprint #h2s #3dart #ikea

Stryve :

just buy a pegboard? they aren't expensive

Linke :

its cheaper to just go to ikea and buy one at that point.

cojuanes :

Kota :

For those saying its cheaper to go to IKEA or better. I did the math for you. It’s ~0.01$ a sq to print vs. (L)[email protected]$ sq in(M) 22.99 @0.048$ sq in (S)[email protected]$ per sq in. So at minimum you’re saving 16.76$ per board. Astronomically cheaper this way.

Forol :

Genuenly.... How DO you avoid this.... I have the same issue printing ASA.... I've tried almost everything and it still ruins my prints.... I've tried fan off, fan on, fast, slow, I print it with the nozzle at 300° heatbed at 105° and room at like 50-60°

Irinel :

that's why I never let it cool on build plate

Omegote :

Printing your own skadis when the medium size is 9€ on Ikea is something I can't get my head around.

MK.SOEB :

Glass build plate should be an option.

Charlie :

Wait so you made one on the broken one for the one that you will throw out because the broken one is broken and that’s why you made another one on the broken one because the broken one is broken so you had too and that’s why you have 2 on the broken one one that is not broken and one that is because one is broken and you needed another one to fix the broken one for the broken one to be fixed than broken

Lolik 123654 :

why not use laser cutting?

Florbo the Great :

change the infill pattern

RelicMaker :

I interacted with one and now my fyp is full of this. And i still don’t get it. You people are doing it wrong, is the other way around, you buy them from Ikea and you print the accesories not the other way around. You wasted like 1/2 spool of filament there for sure.

kubarlov :

perfect adhesion? 😎

Genny :

Well, atleast your plate is clean. 😂

user xd :

jeśli to petg to za duża prędkość drukowania i za duże różnice temperatur

Aeny :

Am i hearing garnet?

VultureGod :

It's PETG, isn't it?

Noclip130 :

о, типичный владелец bambulab впервые столкнулся с физикой😁

Дима :

верно ли я понимаю? 1. можно или печатать на холодной пластине чтобы материал сразу охлаждался 2. или наоборот поднять температуру стола и уменьшить обдув

jimmer :

At least, you know your bed, adhesion's good.

𝕾𝖙𝖆𝖍𝖑𝕾𝖈𝖍𝖜𝖊𝖎𝖓 :

i have the Same Problem but i didnt found any solution 🥺

wel.in :

Как такие проблемы решать? Что бы пластина не подымалась из за пластика?

PETODECO :

I didn't even know that could happen

Z_rider🇮🇹 :

It’s curling

Marquitos🧸🍯 :

Le dio warPing a tu cama bro