Engr Javeed Iqbal
Region: SA
Sunday 29 March 2026 19:34:40 GMT
8248
328
34
5
Music
Download
Comments
Arslan Ahmad :
1. Anchor bolts Dia 2. Anchor bolts type 3. Anchor bolts length 4. Anchor bolts center to center both sides 5. Projection 6. Grout thickness 7. Light poll box size. 8. Tapping on the top of anchor bolts to avoid concrete falling 9. overall check cleaning anchor bolts not damaged ties properly.
2026-03-29 19:53:15
5
laiba 😚💕 :
Check the bolt alignment, verticality, and projection height against the template. Ensure the cage is perfectly stable so nothing shifts during the pour measure twice, pour once. am I right? UETIAN
2026-03-31 13:06:07
0
Gondal Ali :
Material should be approved - dia of anchor bolt- c/c distance- projection- edge distance- use temporary template to avoid tilting and moving- top level- avoid to touch with rebar - threaded portion cover with tape
2026-05-06 17:21:44
0
Engineer Tufail :
A lot of abbreviation have in this formwork
2026-03-29 20:16:48
2
Ishqzadaa1 :
kindly check the level with the help of surveyor because its can"t be set after the pouring.
2026-05-05 17:26:03
0
Lucky :
It is L/M the I bolts need 17 cm up from the top of concrete and need the condute 10cm up to avoid from the embedding status
2026-03-30 08:26:54
0
ILYAS KHAN :
did you tie the anchor bolt to maintain its verticality?
2026-03-31 16:11:25
0
Usman Ali :
I done 👍🏿
2026-03-29 20:04:48
1
Bassam K. :
before pouring just check it's location XY only , if anchor bolt 1Cm ± no problem bcz it has tolerance gap about 3 to 4 cm. After that when you installing Pole this time you have to check level in mm
2026-03-30 13:03:15
1
asmat4245 :
first anchor bolt contain on serviar and welder you should secured the nut of anchor bolt from concrete
2026-04-01 02:58:42
1
Engr.Hilal Ali Khaن :
Anchor bolts Dia, length templates center to center distance, Projection, alignment, cross bar, cover with masking tap & formwork suppurts, after pouring check with survivor
2026-03-30 03:11:59
0
لعبة اسبانيا وبلجيكا مباشر :
reply inbox
2026-03-30 03:02:33
0
阿扬·阿里·汗 :
Check the bolt alignment, verticality, and projection height against the template. Ensure the cage is perfectly stable so nothing shifts during the pour measure twice, pour once. That it 👍
2026-03-30 09:05:08
1
🇵🇰 Furqan Ali Shah🇸🇦⚔️ :
not use wood ther steel bar weld with them for constant if you use wood stack out will not correct
2026-03-29 20:18:03
2
Mehboob Ali :
Mashallah great effort
2026-04-25 14:21:22
0
🇵🇰꧁☬ نعمان مروت ☬꧂🇸🇦 :
great sir g ❤️
2026-03-29 20:42:01
0
Bɩɭʌɭ Aʜɱɘɗ :
No sir, Please tell us ♥️
2026-03-30 02:37:15
0
Usman Ali :
before yesterday
2026-03-29 20:05:00
1
freez1215 :
Center to center of anchor bolts is 870mm?
2026-06-28 15:26:40
0
Civil Engineer :
👍👍💕💕💕
2026-03-30 10:46:48
0
ᥫ᭡انجینئر نعمان حیات⏤͟🇵🇰🇸🇦 :
♥️✨️
2026-03-30 05:23:26
0
ímâdùllãh529 :
💝💝💝
2026-03-31 04:08:55
0
To see more videos from user @engrjadii0, please go to the Tikwm
homepage.
