Mike
Region: US
Monday 30 March 2026 13:16:18 GMT
63962
3005
137
132
Music
Download
Comments
mikepoe409 :
the tool we used to use to separate the two nuts was called a pork chop. At least up north where I'm from. 🤣
2026-03-30 20:25:21
24
Joe Bostic :
Do I work on big rigs? No. Did I watch this whole video. Yes.
2026-03-30 15:23:10
49
Beau Nath :
Interesting Down here in Australia we only have a stud and one nut holding a set of duel wheels on 👍 never had a problem only if the nut comes loose you lose both wheels 😁
2026-03-31 08:56:31
2
Frank Gatto :
Any disadvantage to running the old double nut wheels over the newer setups
2026-03-31 09:18:27
2
l :
hub piloted versus stud piloted nobody knows that shit no more
2026-03-30 19:19:59
18
Robert Beck :
the plastic rings you are talking about is we would put them in between the two wheels that way you could run steel wheels on the inside and put the aluminaum wheels on the outside to keep the steel fuseing to the aluminaum wheels and it will fuse together i spent a hour one time getting them apart
2026-03-30 13:57:27
13
Keith Dubbs :
This is why things cost so much money to work on
2026-04-02 04:11:55
2
chrisstorey233 :
Plastic rings were to stop the rims from locking together over time
2026-04-02 03:33:17
2
EmpathyGuided-DieHard🇨🇦 :
Also called stud pilot. The tool that looks a bit like a short wrench, we call that the pork chop in the tire industry. And those black plastic rings were meant to try and prevent corrosion and bonding of the mating surfaces. We definitely used them to prevent marring the finish.
2026-03-30 19:49:47
5
cwmoore1980 :
Anti-seize is your best friend on stud pilot wheels. Another tip, is when you remove the outside tire, always tighten the inner wheel up. If the thimble is loose, when you put outside tire on, it will break wheel stud every time.
2026-03-30 15:41:25
8
red :
Stud bottle
2026-03-30 22:13:48
3
user8186545055442 :
Some time you will drive the stud end the drum JB trucking 369
2026-04-05 17:05:52
2
jag :
They’re also called stud piloted wheels
2026-03-31 09:01:17
3
awollman :
They make inch and a half sockets with the square built in. Same socket for both
2026-05-24 03:20:19
1
Midnighter :
Back in yrs ago when I worked in oilfield we changed out our 100 deg in south Texas. tires , but we aways had to use a cheater pipe, those were the days .
2026-03-30 14:21:47
6
Kevin Murphy :
My first truck had the stud mount on it you learn quickly lol
2026-03-30 13:53:50
6
user1578081174817 :
good job 👏
2026-03-30 23:21:26
4
Peterbilt motel :
Mostly on containers
2026-03-31 00:20:25
3
max katy :
my brain hurts
2026-04-01 03:27:18
2
MadMan :
That’s nuts, thanks gear man
2026-04-02 01:42:55
2
T.Barrett :
I always let them hammer on the left hand threads for a few minutes. Then show tgem. Then atleast 30 minutes on inners yanking on the wheel trying to get it off before showing them the inner stud. 🤯
2026-03-31 02:42:37
3
Kevin Edge :
a lot of 24.5 are bud wheels
2026-03-31 15:11:14
3
super :
i knew that when i was 16 yrs old..
2026-04-14 17:05:02
1
Rusty :
But your turning left hand lol
2026-03-31 14:46:57
2
To see more videos from user @gearman_93, please go to the Tikwm
homepage.
