Veronica | FastLittleFih
Region: US
Saturday 18 April 2026 01:19:49 GMT
10675
45
114
1
Music
Download
Comments
CommanderInQueef :
If you just simply remove the hub assembly, you can remove and replace the lug studs. Then re install the wheel hub.
2026-04-18 01:46:54
26
Jason Jason :
Angle grinder and a nice Diablo cutting wheel
2026-04-22 12:47:38
5
riceCracker1989 :
Check around the hub, most cars I’ve worked on have a notch in the hub to allow studs to be popped in and out
2026-04-19 17:06:28
8
a :
Hondas procedure is to press out the hub. The lazy way to do it is by grinding a small portion off the edge of the back of the stud so it fits past the knuckle coming out then grinding the same portion off the new stud so it also then fits past the knuckle going in, or grind a small portion off the knuckle so the stud fits past it
2026-04-18 02:02:53
16
chubrock :
Remove the castle nut, hub slides off.
2026-04-19 08:15:16
5
man :
cant be stuck if its a liquid
2026-04-18 02:06:08
8
Wes :
Step one buy Aaa for $50 step 2 two to a mechanic an stop touching tools.
2026-04-19 10:46:22
6
smokehouse45 :
unfortunately... you have to press the hub out. and install a new hub and bearing set. you can get the kit, hub. bearing. snap ring. nut.
2026-04-18 20:59:26
5
Joe Peasley :
Just did this on a older car. but had the clearance. probably have to remove axle nut maybe the hub housing, if the hub won't slip out of the bearing.
2026-04-19 13:58:00
5
Bumtown915.com :
get yourself a new wheel hub bearing
2026-04-18 23:41:13
6
3.9 _ rich :
time to replace the entire wheel hub / bearing assembly
2026-04-18 01:32:55
5
Michael Stebbins :
replace the hub and bearing or hub assembly.
2026-04-18 18:08:45
5
jimjackson292 :
Replace the hub...less headache!
2026-04-20 18:36:50
5
TimeBandit72 :
Use a slide hammer and the appropriate flange to pull the hub. Replace the studs. Install the hub. Be sure to use a torque wrench and tighten the axle but to spec or you’ll waste the wheel bearing in quick order.
2026-04-18 19:03:34
10
Jesusisking :
What’s a wheel stud?
2026-04-18 01:31:15
5
MuskyHyena :
Looks like it’s a wheel bearing hub assembly. Need to replace the whole thing.
2026-04-20 07:37:27
5
Buckslayer88 :
replace the hub
2026-04-18 12:54:00
9
hughorourke7 :
hot wrench
2026-04-19 17:27:26
5
Jay guapa :
You can buy a knew knuckle for like 100 I just did the same thing
2026-04-19 14:21:51
6
ISoslow :
Cry and bring it to a real mechanic, that is not a fun issue to solve without proper shop tools
2026-04-18 01:46:05
10
Gavin :
Air hammer and penetrating fluid
2026-04-18 06:05:16
5
legalsvj31 :
You have to replace the whole bearing is what it looks like
2026-04-18 01:32:06
5
Kenny Bearden971 :
have to pull the axle
2026-04-21 23:47:35
4
MrPatrick K Magee :
big ass hammer
2026-04-22 00:11:09
3
To see more videos from user @fastlittlefih, please go to the Tikwm
homepage.
