@jamageddon: CPU thermals Part 9a: If your CPU runs hot, you can fight the heat at source. 2 methods of undervolting using Ryzen Master and BIOS #undervolting #cpuperformance #ryzen7700x #pcoptimisation #curveoptimizerguide

Kazuto Kirigaya :

And if you folow her and still get crash or core/clock stretching means CPU load line calibration changes everytime you boot because its auto as default. My recommendation is to start to set up a value for CPU LLC (load line calibration) then start with undervolt 👀 Other thing I recommend is to set negative curve optimazer for each core manually insted of all cores😁 if you do not care about multicore performance you can limit ppt and still get overclocked +200Mhz on all cores when gaming👀

One_Soule :

I have the time! Too bad you don’t do YouTube. Love your content as you haven’t sold out with some sponsor plug!!!

Josh m :

I do

S :

Is it normal for a 7700X to turn 95 degrees in Cinebench i have a peerless Assassin

viniciusnasc :

Nice! Thanks

no.redhats :

Tnx👍👍👍

solodachi :

Kazuto Kirigaya :

For people who have ryzen 9600x like me I will share what I run below. CPU load line calibration lvl 4 slightly undervolt for multicore. Then I set up CPU switching frequency maxed out will stress more on VRMs for motherboard but they are fine for me at 60C. Then I started with increase my VDDG CCD to 975mV and CCD and IOD as 1.05V and doing 2133FCLK. Next step was PBO: motherboard limits or manually set up ppt on preference, then x10 +200Mhz and restart PC and save profile before starting with undervolt. When undervolt I started at -20 one by one core, I end up -48 curve optimazer since -49 give me core stretching. and to give more voltage on max clocks I used curve shaper max clocks as posetive +2 when everything else in curve shaper turned off.