@alomdagroupp: #hikvision_mena #hikvision #Hikstar2026 #hikvision @العمدة كروب مشاريع

العمدة گروب
العمدة گروب
Open In TikTok:
Region: IQ
Monday 27 April 2026 15:45:42 GMT
11006
442
2
4

Music

Download

Comments

ghshxbsh
دولة البومرعي :
2026-04-30 02:40:34
1
mohammadkinyar110
mohammad kinyar :
@🥰
2026-09-15 16:05:16
0
To see more videos from user @alomdagroupp, please go to the Tikwm homepage.

Other Videos

How to fly an Airbus A320. Part 7: starting the engines ✈️ There is no key. Just one knob and two switches. But first, the basics. BEFORE START ⛽ Fuel pumps: all on. A white light means a pump is off, so the panel goes dark. 💨 APU running, APU BLEED on: its air is what will spin the engines. 🅿️ Parking brake on. Thrust levers at idle: an engine starts wherever its lever is. 🚪 Doors closed, start clearance from the tower and from the ground crew. 🔴 Beacon on: engines about to start. THE START 🎛️ ENG MODE to IGN/START: the lower screen shows the engine page and the air conditioning shuts off. ⬆️ ENG MASTER 2 on. The computer runs the start, the pilots watch. 1️⃣ Start valve open: air spins the core, N2 climbs. The big fan is already turning slowly. No fuel, no flame yet. 2️⃣ 16 % N2: the spark. 22 %: the fuel. It lights up, the temperature climbs, the fan speeds up. 3️⃣ 50 %: the start valve closes, the spark stops. Idle: fan about 20 %, close to 400 °C. Then the same for engine 1, knob back to NORM, APU BLEED off, after start checks. Engine 2 usually goes first because it powers the hydraulics behind the parking brake. Some airlines start with engine 1, and the exact order of the flows varies by airline. (CFM56 values, timing shortened for the video.) Parts 1 to 6 are on my page. Next: how to taxi to the runway. Follow so you don't miss it 👇 3D cockpit and aircraft: FlightGear A320-family (GPL v2) by its contributors, github.com/legoboyvdlp/A320-family #a320 #airbus #pilot #cockpit #aviation
How to fly an Airbus A320. Part 7: starting the engines ✈️ There is no key. Just one knob and two switches. But first, the basics. BEFORE START ⛽ Fuel pumps: all on. A white light means a pump is off, so the panel goes dark. 💨 APU running, APU BLEED on: its air is what will spin the engines. 🅿️ Parking brake on. Thrust levers at idle: an engine starts wherever its lever is. 🚪 Doors closed, start clearance from the tower and from the ground crew. 🔴 Beacon on: engines about to start. THE START 🎛️ ENG MODE to IGN/START: the lower screen shows the engine page and the air conditioning shuts off. ⬆️ ENG MASTER 2 on. The computer runs the start, the pilots watch. 1️⃣ Start valve open: air spins the core, N2 climbs. The big fan is already turning slowly. No fuel, no flame yet. 2️⃣ 16 % N2: the spark. 22 %: the fuel. It lights up, the temperature climbs, the fan speeds up. 3️⃣ 50 %: the start valve closes, the spark stops. Idle: fan about 20 %, close to 400 °C. Then the same for engine 1, knob back to NORM, APU BLEED off, after start checks. Engine 2 usually goes first because it powers the hydraulics behind the parking brake. Some airlines start with engine 1, and the exact order of the flows varies by airline. (CFM56 values, timing shortened for the video.) Parts 1 to 6 are on my page. Next: how to taxi to the runway. Follow so you don't miss it 👇 3D cockpit and aircraft: FlightGear A320-family (GPL v2) by its contributors, github.com/legoboyvdlp/A320-family #a320 #airbus #pilot #cockpit #aviation

About