Misha Panchishak
Region: US
Tuesday 28 April 2026 11:18:32 GMT
93224
1367
55
92
Music
Download
Comments
misterbacklund :
Why wouldn’t you use proper mirror adhesive
2026-04-28 12:41:41
32
JB665 :
That’s not how suction works champ hahaha
2026-05-08 02:52:22
3
Noki poki :
And how do you remove it?
2026-04-29 15:47:26
7
Elwacheguero :
Never use glue lol . Use mirror mastic .
2026-06-02 03:09:53
4
Anthony Constamtino :
be careful some adhesives will bleed through the silver coating on the back of mirrors unless it has a sealer on it
2026-04-29 02:02:24
10
Piper5440 :
While Gorilla HD General Purpose Adhesive is a STPE adhesive and as such is less likely to affect mirror silvering than solvent-based adhesives, chances are good it will damage the silvering on the back of the mirror, especially when applied in circles; the enclosed center of the circle will take forever to cure, and will make it easier for the wet adhesive to eat through the silvering. Best to use a neutral cure silicone sealant applied in vertical lines so as to allow air flow by convection behind the mirror. And always support the mirror mechanically until sealant has fully cured, usually at least 2 weeks depending on quantity of sealant and relative humidity.
2026-04-29 14:07:32
5
Sean McLaughlin :
Mounting brackets, not glue!
2026-04-29 05:44:41
4
user204363292566 :
Why use gorilla glue to begin with and so much glue????
2026-04-29 14:45:13
3
Mazin0820 :
How is this a trick
2026-04-29 01:19:37
3
tonyburg :
Silicone will be seen from the mirtor side
2026-04-29 01:43:14
1
Michel Sabourin979 :
Silicon is what they use
2026-04-29 01:41:07
1
Ericela Bolin :
i like the circles . Makes sense for suction.
2026-04-29 04:05:37
1
el geffe :
you need to use mirror adhesive. I did what you did and two years later you could see my glue blobs through the mirror
2026-04-29 22:04:06
3
kV :
Any silicone would be good enough
2026-04-29 02:03:35
1
$Kordel$ :
All u do is a bunch of straight lines and done
2026-04-28 21:55:01
1
glidinghypnotist :
We did that with kitchen cabinets. A straight board in the bottom. Glue on the wall up with em. Temporary screws while glue dries.
2026-04-28 12:04:29
1
Markovich Gallagher 🇨🇦 :
It takes silicone
2026-04-30 01:39:30
1
misterbacklund :
What’s that got to do with anything? I’ve seen his videos he’s got a lot of skills
2026-04-30 03:46:44
1
danielrafter06 :
Hope you don’t see the circles after it’s cured
2026-04-28 17:53:41
2
Rudy Cavarzan :
al livello do portata di peso ed efficienza vanno messe delle x e non cerchi verifica i dati tecnici è un errore che fanno in tanti, nemmeno le linee di silicone non vanno bene scusa
2026-04-28 13:15:40
1
Taras🇨🇿 🇺🇦 🇺🇲 🇮🇹 :
👍 Super 👍
2026-04-30 00:28:32
1
PaThOGeN74 :
This is horrifying
2026-05-24 23:51:42
0
Sean :
Ignorance is a scary thing. I came to the comments to thank him for his clear and simple instructions. Now I don’t know what to do.
2026-06-11 13:15:40
0
Eric Vergato :
u don’t many pieces
2026-05-11 21:52:39
0
Dave 501 :
I installed big mirrors with adhesive. When the bathroom gets slightest steamy, can see the exact pattern of adhesive from condensation. 😳
2026-06-23 03:56:43
0
To see more videos from user @winnidesigns, please go to the Tikwm
homepage.
