@ecutesting: ⚠️👨‍🔧 If your CAN bus communication faults have you suspecting an open on the network, then grab your multimeter and follow Tim as he explains how to locate it. 🎥 Full video link in bio. #ecutesting #carrepair #mechanic #diagnostic #fyp #foryoupage

user8793123772637 :

Hi, I’ve got a 2019 Toyota Hilux 2GD GD6 4x4 Manual with a problem regarding the 4L communication to the ABS pump. Physically, the 4x4 system works perfectly in both 4H and 4L. The transfer shifts correctly and drive engages properly. However, the ABS and traction control lights stay on because the 4L communication signal does not seem to be reaching the ABS module/pump. I need assistance with the 4L communication circuit to the ABS pump/module. Any wiring diagrams, pinouts, or advice on where the 4L signal comes from and which pin it should reach on the ABS module would really help. Thank you.

sparkle :

Just make sure vehicle doesn’t have a can gateway module or this test is irrelevant at one connector and will give open circuit when testing resistance. Test will need to be conducted at gateway module and if that module has failed you will have no communication with any module with diagnostic tool

Yasintech auto Ug :

what are the two terminating resistors ?

Jeandre Daries :

You should be reading 60 Ohms.

mame :

castle shin :

👍👍👍

4g63T :

😂😂😂

MUTEBA :

❤️❤️❤️

jimmie☘️🧸⌚️ :

🔥🔥🔥

ငါဟာ တိမ်တိုက်ပါ :

🥰🥰🥰🥰

Khoatrọng86 :

🥰🥰🥰