Kale
Region: CA
Tuesday 05 May 2026 22:26:57 GMT
18431
1824
70
9
Music
Download
Comments
Luke E Singrey :
R u using grade 8 bolts
2026-05-06 03:47:15
6
Jeremy Hadley :
a&i for the rad. put one in my 2590 a few years back but cannot remember how much. it wasnt horrible though
2026-05-06 06:40:56
3
Elliot :
Shanks are spring steel and suck to drill. Can be done but it sucks
2026-05-06 01:27:29
4
Dillan :
What about a pin instead of bolts?
2026-05-05 23:34:17
4
Brentguydude :
Have you priced having it recored? Or is replacing it nearly the same price anyways?
2026-05-06 01:24:40
5
Stanley Glover :
Got a wrecker rad a few years ago for our 94 for $500
2026-05-07 14:49:24
1
G4heavymechanical :
Try a taper reamer to up size the holes rather then a regular drill bit
2026-05-07 03:59:34
1
derekslaferek :
I bought a radiator for my 2390 off. EBay and its aluminum one. And it cost me $900. And I still think they're the same price
2026-05-06 01:31:38
4
y :
Could you weld a section of chain from each shank to the frame. That way if the bolt breaks hopefully it’s still there waiting for you.
2026-05-05 22:39:33
17
Aaron :
We ran a rotory screen on our 4490. That era case had to fine of rads
2026-05-06 01:46:05
3
Kevin Booth :
Any luck getting rad cleaned at a rad shop ? Have the same issue with a case
2026-05-06 03:57:03
4
Robert Williamson375 :
A 9/16 fastener is harder to find than a 5/8
2026-05-06 02:32:15
6
Julian Fidek :
is the shank of the bolt through the cultivator shank and spring mount? maybe a longer bolt with more of a shank, and then a spacer bushing ontop to waste some length will be the fix. then you have full shank bolt through it instead of it breaking right at the end of the thread.
2026-05-06 02:43:00
5
Noah :
Instead of a drill bit use a tapered reamer would be so much easier
2026-05-05 22:37:30
6
farmboy263 :
not made to work ground like that should be worked up before u work with that
2026-05-06 04:30:33
4
Sumthingcool1 :
Front wheels sure make that tractor look sexy
2026-05-06 14:07:15
4
🍻Cory :
Dang what a nice set up man looks nice 👍
2026-05-06 06:34:03
3
derekslaferek :
What about trying cat bolts? They're a little bit better that I find.
2026-05-06 01:33:47
2
Lil bob :
what grade bolts are they cant you just upgrade to better bolts
2026-05-05 23:49:33
4
saskdenimbastard :
if you gonna upsize all those holes like that treat yourself to a fluted car reamer. makes the job way easier. standard way i hand drill holes in my welding shop now, start with a 1/4" bit and work my way through the reamer set till the holes big enough.
2026-05-06 06:13:22
2
drifter :
We used one of those cultivators for a long time. Did a nice job.
2026-05-06 02:57:29
3
🐖KyLe🏴☠️SeLKe🐖 :
better finding it on the pass by. then during seeding with a tire
2026-05-06 00:04:16
4
Bedack :
have you thought about adding a couple of cheap electric fans?
2026-05-05 22:50:36
3
Gene Eddy :
From the look of it replace half inch bolts every year instead of drilling out and going bigger
2026-05-05 22:45:24
2
To see more videos from user @interstate_day_dream, please go to the Tikwm
homepage.
