Mark DeCola
Region: US
Friday 22 May 2026 02:09:15 GMT
357395
33739
192
136
Music
Download
Comments
Tylor :
Not trying to be hard on you, but ALWAY ALWAYS ALWAYS unhook modules when welding on machines. ECM’s, Clutch control modules, screens is they’re canbus, emission modules, etc etc. welding on a machine is the number 1 failures of modules that i see.
2026-05-22 03:52:38
36
Cejaye🎱 :
i miss one vid and now he has an excavator
2026-05-22 02:23:49
870
RowanAboat :
Welder here, great job for not being a welder! Way to grind out that crack, and drill out the ends. In my experience if something breaks once in a spot it probably will again since it’s a high stress point. Definitely wouldn’t hurt to add a fish plate to either side of the boom to reinforce the area, make sure you cover the hydraulic cylinders when you weld over them, and remember to clean your welds with a wire wheel and paint so it doesn’t rust!
2026-05-22 03:19:39
497
derikgear :
I’m no welder but this plate is the cause of the crack, you should make it bigger
2026-05-22 02:44:16
136
Al Paca :
i am a welding inspector and by what i can tell by seeing a video i think you did a pretty good job. Remember to heat up the piece before welding, remove more paint around the crack, grind more root.
2026-05-22 03:11:00
96
Arakcheev :
You ok? You sound like you’re coming down with a cold
2026-05-22 03:17:54
131
Talon5Karrde :
Why not weld this with Stick or TIG? I thought that for this application Stick and TIG would be a Stronger option.
2026-05-22 05:22:59
5
Michael Massey :
please do not use that 50 amp plug to back feed your panel with a generator... you will essentially need a death cable to back feed from the generator to the house. the generator side should always have the "female" plug (twist lock) and the house side should have the "male" (twist lock). the current set up would require you to have a dual male ended cable causing a the house side to be a live end if the generator was running while you were to pull in or unplug the house side. you can get the proper plugs at any big box hardware store or Amazon for relatively cheap.
2026-05-22 09:42:37
6
Lucas :
Think I found a little problem with the skid steer
2026-05-23 16:01:11
8
52ethan_diesel_23🧸❄️🦆 :
Stick with 6010/8010 root and some 7018/8018 for fill and cap all uphill
2026-05-22 10:40:07
5
Anastas Dubikin :
Should’ve covered the piston
2026-05-22 03:22:24
6
wsdalaw209 :
I'm not a welder anymore than you are but I hope you disconnected your battery terminals. When welding anything with a battery you run the risk of having a surge fry your electronics ie gauge cluster, ecm, PCM, etc
2026-05-22 11:45:29
6
chris swanson :
maybe owning a welder has finally let your eyes see the welding problems that were in fixable before lol
2026-05-22 02:17:59
26
DJ〽️ ×̷̷͜×̷ • Friends :
Velcro will hold better than that shit! 😅Jkjk. It’ll hold till it doesn’t 🤷♂️keep an eye on it
2026-05-22 17:18:01
1
Clapped 4.9 :
So I’m not the only one that’s stuffy
2026-05-22 02:33:20
49
call_me_daddy_004 :
Probably should have covered that cylinder for the bucket. cuz I’m sure you now have spatter all over it and will destroy them seals.
2026-05-22 03:13:05
5
Yaron :
Always cover your rams spatter kills seals real quick and I’d have put 2 passes over the top not 1 but all good. I’d also do some fish plates coz it will crack again even tho you fixed it right
2026-05-22 08:00:16
5
kwwwaaaazzzzyyyy :
If yall start lagging, go to his profile instead of watching it on your feed
2026-05-22 02:12:23
15
Jon :
I would add a plate over it
2026-05-22 02:33:31
7
Ricky Pisarchick :
Preheat
2026-05-22 02:24:58
5
DJMIXZ :
Am I the only one hear that he’s sick 🥺
2026-05-22 02:23:25
6
Darryl :
good job but cover your chrome cylinder rod to protect it from sparks
2026-05-23 00:32:47
4
Jake Ramirez :
Them spring allergies are getting to you my brother!! we need to move the projects inside haha!! always look forward to your videos 👌👌
2026-05-22 23:29:47
5
Dennis :
Plate the sides
2026-05-25 02:58:33
4
To see more videos from user @mark_decola, please go to the Tikwm
homepage.
