@bon_fire23: ✅Narrow aisle specialist at work #warehouse #reachtruck #safety #forklift #fypシ゚viral @Bom Peerapong @nenedepano @LifeInVan @user6815816143431 @jerome espina @winnerwin @Manitou un loup imprévisibles @Kycee

JavaFiend :

must be nice to sit down on a reach truck

caterpiller24 :

From a qualified instructor that’s not the correct way to operate a reach truck, have you never heard of a stability pyramid?

Wes big poppa pro ledbetter :

Plenty of room!! And that lift has a SEAT!?!

Mario Scanu :

You are not working safely! It is forbidden to turn the truck with the forks raised and even less so when there is a load on it! You must position yourself in front of your load, maneuvering with the forks 25cm from the ground and mount your forks once correctly positioned

Devin :

completly wrong way to use a reach you turn, then lift and line the forks, then extend pick the pallet retract and bring it down.YES I AM FORKLIFT CERTIFIED LOLOL

bossdoms293 :

Unsafe bro 😁🤣

Ганчо Луков :

If you can turn and fit sideways in the isle..... it's not tigh

❌BigPapaShawn21❌ :

Not a very tight aisle. I've operated in far tighter ones, ones where you had inches to back up and drop your pallet

Xero :

those my friend are regular aisles,

Manmohan Gill :

crown worst machine

TC :

Depending on what your company considers narrow aisles it maybe consider narrow, unfortunately a Crown reach truck needs a minimum of 8 to 10.5 feet to make a turn in an aisle so for most of us that is not a narrow aisle, swing reach/ turret trucks or order selectors on wire guided are the standard especially in Canada under their OSHA requirements which is one of the strictest in the world.

🔥SpicysHubby🔥 :

we have hysters and Yale ones and they have a camera on the mast to see better. higher ceilings here though

angi💀 :

We have all yale at mine, I'm terrified to learn the reach trucks. I know short mast, but I just prefer cruising doing laps on my triple pallet jack dropping off in the aisles they go in 😂

JEM :

you call that tight?

Xheavymetalx :

can't turn with forks raised ! 😂😂😂😂

ntando_041🦦 :

younxri$t :

in crown we trust🔥

dn4mycrown :

thats not tight we use drexals and turn the forks to the rack

gamertag1236 :

this is not a tight aisle

RangerRickLives :

I'm a 25 year Raymond technician. I hate the Crown mono mast crap

K Rohrbach :

that's not a tight aisle 😂😂. and you're not supposed to turn like that with a load in the air.

jpackpops :

man stop acting like there isn't a camera that pops up on the screen past a certain height 🤣

mitch :

how bout raising your forks 30sec from target reserve then turning and lowering one second before the pallet clears obstacles because the machine doesn't understand a productivity environment. by the time the machine reacts, you're clear and thinking about the nextmove.

jaxonheke :

All these forklift teachers in the comments😂

jerry4k :

that’s not right gang😭✌🏾