buildwithvictor_
Region: US
Sunday 24 May 2026 23:31:44 GMT
8349
82
21
6
Music
Download
Comments
Jacob Beltran :
At the end so if it gets clogged you can cut it off and put a new one without having to dig anything up.
2026-05-25 19:56:42
6
eg_42 :
The difference is where you drop pressure. You can't start with a dripper then run 20ft of 1/4" tube, but you can if the dripper is at the end. With 6" runs, no difference.
2026-05-25 16:19:39
2
dsmjackson :
I’m having leaks where I punch into the 1/2 inch tubing with the 1/4 barbed piece. Any tips for that?
2026-05-25 12:36:37
1
SG#2025 :
I would install the emitter first to prevent dirt from clogging it.
2026-05-25 16:10:56
2
amigolou3 :
either way. only emitter at the end makes replacing it easier in the future. they get replaced often.
2026-06-13 00:31:30
1
Manny Ramirez :
I put the emitter on the tube and the other end with a stake.
2026-05-30 06:29:48
1
dangdgaf :
I never use spaghetti tube bc it’s prone to breaking. The set-up will last much longer without it. It’s easy enough to weave the 1/2” line near or around each plant.
2026-06-05 23:41:14
0
Robert Vallejo :
I use a hunter rotor key as a punch. I never have leaks.
2026-05-25 17:58:43
1
aj.hardscapes.llc :
Using coupler and emitter is doubling the chance of failure ;due to calcium build up . Calcium Can happen on coupler or emitter however the build up may never happen . My opinion.
2026-05-27 00:33:08
1
mikesinicropi112 :
Put it at the end of the tubing, changing the emitter at the end is easier for changing the amount of water you want the plant
2026-05-30 13:46:31
0
Martinez Jr 😎 :
If in the future there is a leak sometimes dirt get in the pipe so if you install the drip in the pipe the dirt will plug the drip
2026-05-27 19:02:46
1
Ricardo DeLeon :
these emitters are designed to go straight into the line
2026-05-25 20:47:01
1
To see more videos from user @buildwithvictor_, please go to the Tikwm
homepage.
