Misfit Printing
Region: US
Tuesday 26 May 2026 03:50:42 GMT
2431214
248952
535
1545
Music
Download
Comments
WhiteGravvy :
You and that Lego lamp guy are having the opposite problems🤣🤣
2026-05-28 06:18:28
6759
Bear 📸🦇🖤🕷️🖊️ :
Okay but i just got the spencer’s pickle lava lamp, but my friends sent me this because they think it needs pickles
2026-05-28 00:09:41
94
ALARIS :
Unfiltered has a vibe of those
2026-05-30 23:38:54
15583
Joshuasoddities :
love it. print them hollow but with varying wall thicknesses so you can identify a weight that is more neutrally buoyant.
2026-05-26 04:14:31
16611
k🎱e :
I think you accidentally made a NZ Feijoa lollies lamp
2026-05-30 13:12:24
26542
LOX_fueled :
3D print them hollow!
2026-05-26 18:07:19
1783
CauseBoxTurtles🆘️🇺🇲 :
I used to make resin ttrpg dice and we did a magic 8 ball style DnD healing potion. In order to get the dice to float ALL the way to the top I believe we used a 4 to 1 ratio of salt to water. Dissolve the salt in the water on the stove top. you can essentially start with like a 1.5:1 then test, add a half cup or cup or whatever, Dissolve, test, etc. Hopefully that makes sense thats basically what we did to find our salt density.
2026-07-12 22:11:21
0
night_sigil :
The red stuff is called pimentos!
2026-05-26 03:59:02
5779
𝑛𝑎𝑡𝑎𝑙𝑖𝑎 :
your mushroom funnel is SO cute
2026-06-03 03:04:42
446
Erica :
I'm assuming the olives are solid resin. Can you print hollow olives to make them lighter?
2026-05-26 13:48:46
4744
Wren :
Try thick water maybe?
2026-06-07 16:25:26
38
Kindgentlechipmunk :
Glad they were safe wearing the goggles
2026-05-26 09:24:21
1733
ರ_ರ :
make sure to not drop them....
2026-06-05 00:16:12
71
Mo :
The cured resin density is about 1.2-1.6 g/cm^3. Saturated salt water is about 1.03 g/cm^3. You need to find a way to reduce the density of the olives. Based on a guess about the size of those, you need to reduce their mass by about 30% while keeping the volume the same. You can't just drill or print a hole in them, you have to keep the outer shell integrity so the liquid from the lamp cannot get inside. Can you print them hollow with a hole on one end and print a red cap to fit snuggly in that hole while not filling the hole?
2026-07-07 08:08:56
7
Dalushin :
"painstakingly painted" literally just made a dot on like 50 balls 🙏🙏
2026-06-29 09:52:12
7
Naomi :
Hollow out your olives, it will lower their density
2026-05-30 17:51:58
112
Missy :
you can dissolve a lot more Epsom salt in water than regular salt!!!
2026-06-06 18:40:28
30
Alice in 3D :
add a small bubble to the olive model with a hole under the pimento, seal the hole when you paint. should make them a little buoyant and add a little chaos to the motion
2026-05-26 09:21:06
164
ronin.513 :
print a hollow test batch with different wall thicknesses to find one that's buoyant or almost buoyant with regular water?
2026-05-26 12:09:50
50
mstea :
could you drill little holes in the Olives to make them more floaty? you could make it an X like where the top of the fancy olives
2026-05-26 04:23:14
76
Ciennaa :
Can we take about the mushroom funnel, thats so cute
2026-06-02 17:02:20
14
J💫 :
the glitter red was such a good move
2026-05-31 07:58:20
20
Kiwi 🥝 :
Asked my husband who 3D prints, he stated make them slightly hollow to reduce the weight and or cover it with silicone. The gem crystal lamp, the gems were smaller, try making tiny olives.
2026-05-27 04:05:55
88
Miimiit :
you could 3D print your olives empty, like with an air bubble inside?
2026-06-04 21:58:52
23
O.C. Robby :
What if you used water thickener or printed them to have an air pocket inside?
2026-06-06 21:26:25
9
To see more videos from user @misfit_printing, please go to the Tikwm
homepage.
