Autotech
Region: SA
Wednesday 27 May 2026 10:53:07 GMT
959549
7018
115
211
Music
Download
Comments
BaKoN_Zombie :
How NOT to compress a caliper 101
2026-05-29 01:51:28
17
HAHAHADontBeMad :
I love all the car gods on here saying the rotor is out of specs just from a video
2026-05-28 16:31:42
7
bb3 :
Pointless putting new pads on that disk is fked
2026-05-27 20:07:40
13
mcfd552 :
that rotor is way too thin after you turned it.
2026-05-29 00:05:12
16
Midwest Hillbilly (Mike) :
Talk about an out of specs rotor Christ all mighty
2026-05-28 00:05:58
5
Mata :
Did he dove the problem or just put a band aid?
2026-05-29 01:44:03
1
Capt. Kirk :
I'd like to see the mic specs on that rotors limits compared to what it got cut down to! I turned rotors back in 1989 for a living. Those grooves were deep on the face of the rotor.
2026-05-29 07:41:52
2
Lisa Mitchell :
clearly you can see that rotor is so far past min thickness!
2026-05-31 00:46:24
2
2SS Black Beast :
does nobody clean the face of the rotor hat anymore with a 3m roloc?
2026-05-28 23:24:56
3
stop following me :
A rotor that thin will not dissipate the heat from the friction. If the pads wear significantly the piston could pop out of the caliper. Minimum is stamped on the rotor.
2026-05-29 07:03:18
2
fatMorty :
he let the caliper hang from the brake line... nice...
2026-05-29 07:04:28
3
John Jamulla :
Didn't clean hub before putting back on.
2026-05-28 19:07:49
3
user8919171859856 :
The left side of that rotor looks super thin. After seeing how much the guy cut into it with the pad, the first time, I’d be leery about using that rotor again after you cut it like that.
2026-05-29 09:02:37
1
wjgar1 :
where is this ? I need to know where not to take my vehicles
2026-05-28 16:37:45
4
DarKe_Live :
Not sure why you're changing parts.. there's still some metal left there.
2026-05-29 02:47:39
1
ShawnShenah :
Needs a new rotor
2026-05-29 07:32:25
2
Hans :
good to know. Never done it like that
2026-05-29 03:43:53
2
CCBangs :
Rotor is trashed
2026-05-29 03:03:59
2
anthonycalabrese51 :
That rotor is way below minimums. With such a heavy vehicle, the heat generated will cause the rotor to warp. VERY UNSAFE. Also, allowing the caliper to hang by the brake line causes stress on the line.
2026-05-28 17:00:26
9
T bird T :
Hope you opened the lid to the brake fluid reservoir before you did that. 😳😳
2026-05-28 22:35:58
3
paulschwerin636 :
because it is. outside edge half as thick as inside edge. most modern specs call for so little runout you cannot resurface and stay in specs. you aren't saving money anyway, just put new ones on
2026-05-29 03:10:41
2
Adrian Keener182 :
he cut the same rotor noway
2026-05-29 03:38:23
2
Kevin Rambeaut :
no lube on sliding parts
2026-05-29 01:29:55
1
Bull :
Always replace the rotor!!
2026-05-29 02:42:35
1
dave :
done that still got to get rotors to put on mine. mine was cracked
2026-05-28 23:07:26
1
To see more videos from user @auto.tech3, please go to the Tikwm
homepage.
