@oliviasaad3: OK, I need your guys‘s help. All ideas are welcome. How do I smash this tile out? #demolition #bathroommakeover #bathroom #bathroomtiles #oldhomerenovation @Bose

jimmyjames71683 :

Hammer drill with a chisel bit

jooanie :

The contractor did their job right with that tile. We just went through the same thing with our walk in shower. It was an entire day of chipping and cutting away. Just for demo

Devin :

I if you’re ever dealing with that wire mesh use a shingle scrapper get a small one to get it started up high then get a bigger one once you can fit it behind you will be able to take down the whole wire mesh & the tile all in 1 and be able to kind of roll it up to throw out. This will save a lot of time & headache

Psychic :

One of these (SDS Plus Rotary hammer) with a chisel bit on it will make quick work of that wall.

Muckenfuss :

Hammer drill

Hadley Knipp :

Bigger hammer

olehpityk :

What a stupid way to do this!

Brian Gregory :

Angle grinder with diamond blade. Cheaper that the rotary hammer

Zain Bhatti :

just buy a new house.

user629976873 :

Rotor hammer

Dark passenger🇨🇦 :

Roy bell :

back when tile work was done right an durable

Mike Willette :

Noticed the hat. What’s your take on the Larkin drama? lol

Casper302 :

Cut squares with a grinder using a diamond blade on the studs and use a 3’-4’ pribar the longer the pribar the more leverage u have and less strength u use

Austin White :

7” Angle grinder, 2 tiles out from the corners, and halfway down the back wall, sledge hammer, maul and crowbars to get behind the plaster, be careful not to put to much pressure on the studs, don’t wanna crack the drywall on the other side.

money :

Honestly just buy a new house

btoad11 :

Get you a SDS and a chisel bit! It doesn’t have to be expensive, go to harbor freight and get a cheap one!

Gino914 :

Get a long crowbar get it in there between the back of the plaster and between the studs trying to pull it off once you get them going the whole wall will come down in one piece, but really I would have to show you

Brandon :

Air hammer

YN :

Don’t forget to plug the tub drain so it doesn’t get plugged with debree

Jordan :

use AI to do it

billnyetheforeheadguy :

you gotta pry it off the wall. but you gotta detach it from the inside corners somehow. you can beat them out with a hammer. or get a right angle grinder and cut out sections. and its finna be heavy af

erikpeckham6 :

Been there manny times doing this as a job. They blow every single time.

David :

had the same issue , its dusty as hell but ended up taking a angle grinder to it and cutting it into squares