@eyethuauto: Quick Installation Guide for Car Door Shadow Lights 1. Open the car door and clean the area where the projector light will be installed. 2. Insert the batteries into the projector light. 3. Remove the adhesive backing from the double-sided tape. 4. Stick the projector light onto the bottom edge of the door panel. 5. Align the magnet directly opposite the projector on the car frame/body. 6. Close and open the door to test the light. 7. Adjust the projector or magnet position if needed for the logo to display clearly. Tip: The light should turn on when the door opens and turn off when the door closes.#fyppppppppppppppppppppppp #cherry #opel #VW #toyota