Why didn’t you press the valve on before you threaded it?
2026-06-26 21:50:08
215
dzirko17 :
Couldve just threaded a new ball valve
2026-06-26 19:15:52
43
Rick Van de Coeverin :
just press before you thread in
2026-06-27 08:20:14
30
Jordan donner :
you could have also just used a thread brass nipple and thread brass valve yall make everything harder then what it has to be
2026-08-17 14:18:11
4
mike :
Water department doesn’t like press or sweat fitting before the meter
2026-06-27 00:08:36
9
Kevin Saskatchewan :
or learn how to do real plumbing and use a threaded ball valve.
2026-06-26 23:53:03
7
3days gc LLC :
This happened because they used Type M copper, and the nipple is also too short. For ProPress installations, we always use Type L copper because it's thicker, stronger.
2026-06-30 03:39:13
4
TH0MAS BR00KS :
Could have just screwed on a nipple and a threaded gate valve
2026-08-10 10:15:58
1
starboy daddy :
you should have prefab the valve first
2026-08-21 01:08:16
2
sam :
All prep work could have been done before cutting out the old gate valve. Would only then need to screw it in.
2026-08-25 22:54:08
1
Brian Djordjevic :
Should have pressed the valve on the the male adapter from the beginning
2026-06-27 14:54:11
5
ikestarr1 :
IPS Valve and what copper to metal fitting
2026-06-26 22:36:15
10
Josh Randall :
why can't you turn off the water at the main?
2026-06-27 05:34:27
5
brett :
when you think about it all the high water pressure is trying to lauch off the valve because the only thing holding it in place is the mechanical crimped connection. I'll stick with solder.
2026-09-24 14:13:26
1
Bee Doggy :
Should of pressed the shut off all together so all you had to do is press
2026-06-27 03:41:10
5
Svullo :
Just skill issues
2026-07-10 17:36:14
4
SkippyDon :
Painful watch
2026-06-27 11:45:18
3
Jordan donner :
u literally had plenty of room to have everything pressed before u thread
2026-08-17 14:17:10
3
Simon :
press lever on first & fit with it open to stop back pressure and then close, check lever open end o-ring before continuing
2026-06-27 08:03:52
8
terrykelley675 :
always turn water of first
2026-06-27 03:55:29
3
Josilili :
Is something call main valve from the city
2026-06-27 02:58:09
3
Dust_demon :
You’re not supposed to connect galvanized to copper it causes electrólisis. It will leak.
2026-08-05 14:52:57
2
Bryan Brooks :
I’ve done that before, but we had the ball valve already installed and ready to go….
2026-08-12 04:44:28
2
wahaj vohra :
the smoother and clean the pipe surface, the better the o ring seals. if the o ring is dry, higher chances that it will leak.
2026-07-03 03:46:33
2
Austin Phillips :
Obviously
2026-06-27 02:51:34
2
To see more videos from user @usaplumberking, please go to the Tikwm
homepage.