Spacing at bottom is over 4 inches and top rail is to wide. Fails inspection every time
2026-07-03 20:31:19
3
Tom_B... :
I build mine exactly like this. However I don’t use the wide 5/4 for the top rail, too wide for small, young and older hands to grip.
2026-07-03 01:01:24
3
Hinesight :
It needs to have a graspable handrail
2026-07-03 19:57:20
1
johnennis92 :
I haven't seen a deck made of wood in a decade
2026-07-03 02:26:56
0
Scott Hardwick :
Because the 2x6 being used for the hand rail doesn’t meet code.
2026-07-03 04:41:32
2
Hillbilly Hartman :
That’s the way my daddy always done it
2026-07-03 23:23:07
0
Jake :
“Looks completely custom” is literally the most basic set of steps I’ve ever seen
2026-07-02 22:29:10
2
skip :
The spacing block is called a jig and we do this it is nothing new and this is not custom😂😂😂😂😂
2026-07-03 01:45:30
1
DayView :
I can see the screws and it's holes on top of the rails.🤔
2026-07-03 15:58:18
1
mp :
I screwed my balusters and added a 2 x 4 in the center to prevent twisting
2026-07-02 23:26:47
1
Michael :
I do build railings like this,Philadelphia
2026-07-03 00:41:11
0
emgee68 :
Circular handrails should be 1.25-2 inches in diameter. Non-circular handrails must have rounded edges, a total cross section perimeter of 4-6.25 inches, and a cross section measurement of 2.25 inches maximum. Anything with a perimeter greater than 6.25” must have a graspable finger recess area.
2026-07-02 23:41:18
5
Michael :
that's how I used to build mine
2026-07-03 23:32:46
0
scubasteve :
that's legit totally
2026-07-04 00:06:59
0
Chris Colin :
Thats the way I do it
2026-07-03 22:58:41
0
jerrytheguru :
we do
2026-07-02 23:13:24
1
Dogman :
Nobody doesn’t know how to do it, but everybody else does.
2026-07-03 16:12:25
1
Richard P686 :
Sometimes it terminates at the exterior wall of the house and sometimes there's a landing and it turns right.
2026-07-03 22:47:43
0
TheMobileHomeKing :
It looks good but it will fail inspection. Need a gripable hand rail
2026-07-04 00:30:23
0
PalamedesHeights :
why didn't he cut the bottoms at the same angle?
2026-07-03 23:21:42
0
devhntrxx :
That’s what we do here.
2026-07-03 22:29:00
0
Big Daddy 420 :
lol been doing that for over 20 year in Kentucky
2026-07-03 22:24:04
0
To see more videos from user @danny_pogofsky, please go to the Tikwm
homepage.