@laserlab.settings: For vector engraving on 1/8" (3mm) basswood plywood, this tested xTool S1 blue-laser setting is a useful starting point: ⚙️ 40 power💨 60 speed🔁 1 pass If the engraving looks too dark, increase the speed. If it looks too faint, raise the power in small steps. Change one setting at a time and test on scrap so you know what fixed it. Wood can flare, so stay with your machine, keep ventilation running, and watch the entire job. 👉 Comment WOOD for 100,000+ ready-to-use laser settings. #LaserEngraving #BasswoodPlywood #xToolS1 #LaserSettings #LaserTips

Laser Lab | Settings & Tests

Open In TikTok:

Region: US

Thursday 16 July 2026 01:47:16 GMT