lubetechguy
Region: US
Monday 20 July 2026 16:06:00 GMT
87696
2542
62
75
Music
Download
Comments
Cesar Tobon :
bolts are on backwards
2026-07-24 03:10:53
1
Unequalchunk463 :
now do the fuck ass vertical bolt ones.
2026-07-20 20:07:36
64
kohen :
Bruh where’s the anti sieze?????
2026-07-20 17:30:13
29
(@_@) :
Arent u supost to pump them 5 times ish to Get all the air out
2026-07-22 13:00:16
1
No name :
show where to cut when its seized im also a lube tech
2026-07-20 19:20:55
86
Aidan Haller :
Step 1 grab the torch, IYKYK
2026-07-20 22:08:54
12
dustinstella :
wth man...
2026-07-21 00:36:14
8
Deaner :
wrong, first get the torches out because I live in the rust belt
2026-07-21 17:59:31
15
RRiley65 :
Piece of advice, make sure you "work" the shock by extending and collapsing it fully a few times before putting it on. it helps distributing the oils especially if its a gas charged shock thats been on its side in storage. just helps to get the shock ready so the driver isnt questioning why his trucks riding like crap with brand new shocks. also helps to check amd see if a shock had a bad seal. ive seen brand new shocks start leaking immediatley after priming out of the box. most of the time nothing happens. they usually tend to self prime after a few rough roads. its just a good habit but not 100% necessary. I do it on every shock I do.
2026-07-21 23:24:12
2
Clappedout2g :
Bruh run those bolts through a wire wheel or at least slap some anti-seize on there.
2026-07-21 00:29:12
5
El350zspaceahip🏅 :
what impact is that
2026-07-22 04:20:38
1
Brad Homolka :
Tell me you live in the south without telling me you live in the south
2026-07-22 00:21:26
1
Robert Sustaita :
Anti sieze
2026-07-20 21:30:52
5
Michael :
You should torque them 150 200 lbs
2026-07-22 02:04:24
2
Robert Kinney :
You forgot to prime the shock
2026-07-20 19:06:40
5
Type One Diabadass Rhys :
I use my depth gauge as a box opener to 😂😂
2026-07-22 15:40:02
1
Hayti :
Easy fix is the name of this page
2026-07-22 10:38:50
1
AGGRESSOR :
амортизатор нужно прокачать перед установкой
2026-07-21 21:56:17
1
tomrcrs :
did u cycle the shock
2026-07-22 10:41:08
1
Brody Thompson :
Must be from the south. Came apart too easy
2026-07-21 02:50:07
2
Gabe Summers❌ :
Those shocks was still good
2026-07-22 00:56:08
1
R_holley106 :
Nothing says “lube tech” like using a tread depth gauge to open the box 🤣. I wanna see you get a top bolt off the vertical mounted drive axle shock next 💪
2026-07-21 02:09:01
2
Tylerh :
I turn the bolt around so you can get the gun on the nut side so it’s easier to heat or cut
2026-07-22 00:09:59
1
jsand4923 :
Using the tread depth checker to cut open the box is awesome.
2026-07-20 20:56:37
5
RustBucket7.3 :
Lil cavity wax on bolts never hurt🤷🏼♂️
2026-07-21 12:06:03
1
To see more videos from user @lubetechguy, please go to the Tikwm
homepage.
