Bill2Go Auto Pro - Bill Slavey
Region: US
Friday 24 July 2026 15:19:27 GMT
156236
4952
284
386
Music
Download
Comments
keithsadowski233 :
Torque converter is pushing crank forward thrust bearing has worn out
2026-07-24 22:17:07
1649
Fred :
Hey guys - is the thrust bearing bad?
2026-07-25 01:21:12
99
henry :
lower belt cover leak
2026-07-25 18:54:09
246
Rich S Severin :
That crank is walkin and taking the front main seal with it
2026-07-24 23:51:27
425
jordan braun :
I bet you won't need a dial indicator to measure that crankshaft end play
2026-07-25 04:08:02
33
Peter Koch Jr. :
Thrust bearing has left the chat
2026-07-24 23:45:39
25
godofnothing :
thrust bearing is excessively worn an allows crank to move up when the transmission drags it down. seen a it only a couple times but this is the most excessive I have seen ever
2026-07-24 21:52:02
102
Jeremy T :
crank walk ?
2026-07-24 21:17:58
30
wrenchhead74 :
thrust bearing is toast
2026-07-24 23:32:26
52
Rickey Henry :
Thrust bearing on crank shaft is shot!
2026-07-24 23:19:10
11
Y2 :
Crank walk, inspect thrust bearings. Replace crank and bearings or bandaid it with a sleeve.
2026-07-25 00:55:37
7
Justin Wilder :
crank endplay excessive
2026-07-28 02:20:50
2
Donny Russell :
Bearings are shot. Soon as you load the crank it shifts enough to leak. That engine is on borrowed time.
2026-07-28 18:31:41
2
Troy :
crank thrust (end play) bearings worn out or slipped out.
2026-07-25 04:42:25
9
jaredspratley460 :
huh, load on engine causes leak, weird
2026-07-28 01:25:14
1
nick nasty :
1st time I see this happen
2026-07-26 23:24:19
0
DOT_DOC_on_tiktok :
Thrust bearing is shot.
2026-07-25 04:17:59
8
Matthew Zimmerman :
Thrust bearings
2026-07-25 00:16:43
5
Tennessee :
Thrust bearing
2026-08-15 15:57:06
3
Cameron Lafferty :
Trans is building pressure is pushing the crank forward due to bad thrust bearings. I've repaired a few vehicles that were manual that the owners held the clutch in at stoplights and wore out the thrust bearings as well.
2026-08-12 04:38:00
0
The Duckman :
Crankcase pressure too high possible blocked pcv, oil finds path of least resistance and is usually front or rear main
2026-07-28 01:26:43
4
rod :
Thrust bearing problems
2026-08-03 01:55:27
0
Flip :
if it doesn't do it in park but in gear.. what's the only thing that changes? torque converter
2026-07-28 07:25:42
0
dzdandcfsd 1317 :
crank seal, along with pcv valve in valve cover. squeak goes away when you pull the dipstick out
2026-09-03 00:56:10
1
raddamiss :
Replace the seal with a factory seal
2026-08-08 06:57:19
1
To see more videos from user @billslavey1, please go to the Tikwm
homepage.
