🔋 Step-by-Step Guide: Complete 12V 100Ah Solar Setup Install the Solar Panel Securely mount the solar panel on the roof or a sturdy frame facing direct sunlight. Tilt it according to your location for maximum solar output. Connect the Solar Panel to the DC Breaker Run the positive (+) and negative (-) PV cables through UV-resistant conduit. Connect the positive wire to a DC breaker or fuse for protection. Connect the DC Breaker to the Solar Charge Controller Connect the PV positive (+) and negative (-) terminals to the controller's PV input. Double-check polarity before powering up. Connect the Charge Controller to the 12V 100Ah Battery Connect the battery cables from the controller's BAT terminals. Always connect the battery first before connecting the solar panel. Install an inline fuse near the battery's positive terminal. Connect the Battery to the Pure Sine Wave Inverter Use thick battery cables (recommended 25–35mm² depending on inverter size). Install a DC fuse or breaker between the battery and inverter. Keep cable length as short as possible. Connect the Inverter to AC Outlets Connect the inverter's AC output to an AC breaker before going to the outlet. Use properly sized electrical wires and grounded outlets. Power On the System Turn on the battery breaker. Turn on the solar controller. Turn on the inverter. Test the AC outlet with a small appliance before connecting larger loads. Monitor the System Check the controller display for charging status. Ensure the inverter voltage remains stable. Regularly inspect cable connections and clean the solar panel for best performance. 📢 TikTok Description Planning your own off-grid solar system? ☀️⚡ Here's a complete 12V 100Ah solar setup with proper wiring connections—from solar panel to battery, inverter, and AC outlets—perfect for beginners who want reliable backup power. #SolarPower #DIYSolar #OffGridLiving #RenewableEnergy #techtok - @techwarden