phillipbuilds
Region: US
Monday 10 August 2026 15:40:57 GMT
107152
2831
81
42
Music
Download
Comments
Amanda West :
That’s hella thick for a 25lb plate
2026-08-10 16:35:45
164
MERC :
Just buy real cast iron ones. They are cheap AF!
2026-08-11 19:29:34
3
BRITT :
Wouldn’t it be easier to create a silicone mold?
2026-08-10 16:48:02
74
jwnz :
I have done this, if you put the letters in at a 45 chafer and plenty of oil it comes out great.
2026-08-11 09:55:27
29
Sean Peer :
Plate looks way too thick to be 25 pounds.
2026-08-10 20:57:58
30
Blake Gerlock :
What does the bucket of water do?
2026-08-10 15:55:48
5
Morgan :
going need a 20foot bar if ur 25s are like 8in wide
2026-08-15 12:30:08
2
Daznad :
I still think it would be a good idea to coat the finished plate in a rubber spray or truck bed liner spray
2026-08-10 19:54:26
14
Lennie Stewart :
Next time get the hand grips in the same place. Spot on though 🫡
2026-08-14 11:45:18
1
Tyler Davis :
You should see about painting the plates with rhino liner when they are fully cured to create a good gripping surface and it will protect the concrete from cracking when dropped
2026-08-10 17:04:49
9
Kats :
I am incredibly invested in this series
2026-08-10 17:43:18
10
aissa_yahiA :
i do this all the time use oil ... used car oil is your friend
2026-08-13 06:18:58
1
Jk52 :
You should oil the top part of the mold before you put the letters in so you can get a better coat which would help with getting it off then as the letters in after might help
2026-08-10 16:41:18
2
Alice :
Am I ever going to make my own weights? No. Am I invested in your project- yes 🥰
2026-08-11 01:18:03
1
James :
maybe steel center that stays as part of the weight plate so no chipping over time with the on and off bar usage?
2026-08-12 18:13:51
1
ChadwickGuitars :
this is going to take you at least 15 years to build a gym. good luck to ya
2026-08-12 18:07:15
1
Jordan :
put some weight on the pvc pipe next time to stop it floating
2026-08-10 15:55:32
0
Mirza__Awais :
u should add wires in it for strength
2026-08-13 09:06:29
1
Phoenix 🔥 🪽 :
spray it with line x for protection
2026-08-11 15:45:19
1
Joel Burdine :
What's the purpose of soaking it in water for a week? I'm not sure if I saw where that part of the process was discussed.
2026-08-10 21:02:39
0
Berk :
Looks good!
2026-08-10 17:26:15
1
itxms92d :
would some epoxy help it with the finish?
2026-09-07 16:13:35
0
clevlin :
Polish it
2026-08-13 21:09:29
0
Jan Dirk Rabie :
Silicone mold might work better
2026-08-13 07:22:28
0
zaydensamardich1 :
Yoooo
2026-08-10 15:44:40
0
To see more videos from user @phillipbuilds, please go to the Tikwm
homepage.
