1. Home
  2. Detail

@nv.shop68: Đồng hồ thể thao nam Sanda 6273. Hai máy chạy song song #donghonam #donghothethao #sandawatch #donghonamdep

Nhật Vượng Shop
Nhật Vượng Shop
Open In TikTok:
Region: VN
Friday 14 August 2026 00:56:14 GMT
1128
7
2
1

Music

Download

No Watermark .mp4 (3.94MB) No Watermark(HD) .mp4 (3.94MB) Watermark .mp4 (0MB) Music .mp3

Comments

kim.nguyn.trn.th5
Kim nguyên Trần thị :
sao ko thấy giỏ hàng vậy shop rồi sao mua
2026-08-15 03:46:38
0
To see more videos from user @nv.shop68, please go to the Tikwm homepage.

Other Videos

#foryoupag #FYF #soundsystem #sub If you wire the two subs in parallel Two 4 Ω subs in parallel give the amplifier a2 Ω load. So the amp is operating at exactly its rated impedance: ◦ Amp:4,709 W @ 2 Ω ◦ Total subs:4,000 W RMS ◦ If power divides equally:~2,354 W per sub ◦ Each sub is rated for2,000 W RMS That means the amp can potentially deliver about18% more power than the subs' combined RMS rating. It doesn't automatically mean they'll blow, butrunning the amp at full output could overheat or damage the subs, especially with clipping, excessive bass boost, or a poorly set gain. Best approach If the subs are genuinely rated2,000 W RMS each, I'd avoid setting the amplifier to deliver its full 4,709 W continuously. Ideally, set the system so each sub receives around2,000 W RMS maximum, or about4,000 W total. Also make sure thevoice-coil configurationis actually 4 Ω per sub (e.g., single 4 Ω or dual 2 Ω wired appropriately), because that changes the final impedance. If you give me theamp model and sub model, I can calculate the exact wiring andgain voltageyou should set for 4,000 W total.
#foryoupag #FYF #soundsystem #sub If you wire the two subs in parallel Two 4 Ω subs in parallel give the amplifier a2 Ω load. So the amp is operating at exactly its rated impedance: ◦ Amp:4,709 W @ 2 Ω ◦ Total subs:4,000 W RMS ◦ If power divides equally:~2,354 W per sub ◦ Each sub is rated for2,000 W RMS That means the amp can potentially deliver about18% more power than the subs' combined RMS rating. It doesn't automatically mean they'll blow, butrunning the amp at full output could overheat or damage the subs, especially with clipping, excessive bass boost, or a poorly set gain. Best approach If the subs are genuinely rated2,000 W RMS each, I'd avoid setting the amplifier to deliver its full 4,709 W continuously. Ideally, set the system so each sub receives around2,000 W RMS maximum, or about4,000 W total. Also make sure thevoice-coil configurationis actually 4 Ω per sub (e.g., single 4 Ω or dual 2 Ω wired appropriately), because that changes the final impedance. If you give me theamp model and sub model, I can calculate the exact wiring andgain voltageyou should set for 4,000 W total.


なんで落ちたと思う❔❔ #あるある #バイトあるある #居酒屋あるある #飲食店あるある #大阪居酒屋
なんで落ちたと思う❔❔ #あるある #バイトあるある #居酒屋あるある #飲食店あるある #大阪居酒屋
BMW 👀❤️‍🩹 . . #bmwm #bmw #unfreezemyaccount #bmwlife #bmwlovers
BMW 👀❤️‍🩹 . . #bmwm #bmw #unfreezemyaccount #bmwlife #bmwlovers
#viral #viralvideo #viraltiktok
#viral #viralvideo #viraltiktok
Light of the blazing sun! #GenshinImpact#genshinfunny#shorts#Mavuika
Light of the blazing sun! #GenshinImpact#genshinfunny#shorts#Mavuika

About

Legal