showPhones
Region: PH
Wednesday 19 August 2026 15:56:05 GMT
27525
562
49
4
Music
Download
Comments
Octav, the phone collector. :
I am not a microsoldering expert why did this show up on my search
2026-08-29 04:22:12
1
Vivo X200Pro glazer😈 :
you don't need a hot air station it could be done with a soldering iron
2026-08-22 08:44:57
1
🩷 | Proto :
all traces seems to be intact so yes, unless you fuck the thing up its fixable
2026-08-20 06:11:59
96
LB_BY_OTTI :
if you use a regular big soldering iron you will just fuck it up but with a hot air station and small soldering iron its easy fix
2026-08-23 14:24:04
6
Ari :
yes 100% its hard tho
2026-09-17 10:01:35
0
Дмитро :
You need a special attachment for the soldering iron for the glue on flex cables. It doesn’t look like it was soldered in the first place
2026-10-16 07:50:00
2
AheadOfTime :
was there even any flex cable?? the rip was very clean i dont think it was there in the first place, i dont even see any traces or tin of it being soldered, maybe it was another method of connecting flex cables like ZIF, but that looks like it could be soldered back, make sure you still have the flex cable and bring it to a proffesional. you cant do it yourself you have a very very high chance of messing up with regular tools
2026-08-20 10:21:54
3
Данила Тех :
Originally it was bounded using ACF tape. Theoretically you don't even need soldering for that at all. You need to clean pcb and flex cable, than using acf tape bound flex cable back with clothing iron or something else that hot and flat
2026-08-28 12:53:42
4
linuxfemboy :
yeah you can, except where are the ripped pads this looks like it was like that from factory, like test pads
2026-08-20 19:54:33
1
tech_rewind :
Z Ultra, absolute tank of a phone but was absolutely fantastic
2026-08-23 21:45:47
10
denismarcu422 :
Im curious, does it have a glass back and alluminium frame or just plastic?
2026-08-23 10:54:51
0
這 :
I'm not a microsolder expert but yes it looks completely fine
2026-09-06 04:46:21
1
sixkrk :
What does this flex do?
2026-08-21 02:17:11
0
rsx :
It is doable tho
2026-10-04 14:38:19
0
sadgipost :
All the traces are intact so yeah should be working if that’s the only problem
2026-08-20 04:22:28
3
John Davis :
Thats not microsoldering, That is most likely a heat flex which is “permanently” attached to the board solder would not be able to accomplish this. There is soldering iron attachments you can buy on temu. This is just like the TV screen flex inside the panel, I forgot what it’s called but it’s either very simple or you need a really big and expensive machine
2026-08-23 23:57:23
1
Bannana fleakes🇹🇷🇩🇪🇺🇸 :
Sure I would just get rid of any excess ribbon and clean with Isopropyl and a qtip then retin all the pads and resolder new flex with flux and medium temp solder and make sure there are no bridges of solder that could short anything
2026-08-23 17:08:11
1
_dretchik :
easy fix, if you want a tutorial search: "Screen replacement keypad phone" the videos have a very similar type of microsoldering which is drag soldering, you will need a soldering iron almost 8 dollars, flux and solder string 3 dollars, i recommend using a regulable soldering iron over the shitty regular soldering irons
2026-08-20 18:27:40
1
Zian Karl Tech 🥏 :
Heat gun ,a good flux ,microscope,tiny soldering tin careful
2026-08-19 16:17:59
6
⠀⠀⠀⠀ :
u need to solder the connector back, it's looks like the trace was fine, yes it's fixable
2026-09-08 07:51:05
0
Tech Service AS :
fixable
2026-09-29 22:40:01
0
myr_1992 :
هل هو متوفر الان لان معي مثل هذا الجهاز ومعطل اريد مثل هذا الجهاز
2026-10-17 23:07:02
0
Alejandro Granados :
is possible, be sure of getting good flux and also using low temperature tin. be sure of testing the soldering iron on another similar mobo Start with 220c. then be upgrading slowly the temperature and testing the best temp profile. need tutorial send dm.
2026-10-03 23:19:08
0
Gökay Kılıç :
ill do it
2026-09-08 19:12:58
0
bear :
easy fix
2026-08-23 14:01:38
0
To see more videos from user @showphones, please go to the Tikwm
homepage.
