@gpr3carpentry: You don’t need expensive tools to get a perfect scribe. 👌🔥 It’s all about the technique. 🔨 #carpentry #finishcarpentry #scribe #woodworking

Anthony J :

Buy some set up blocks. That’s what I use.

Don GarciA :

on bigger gaps; totally worth it. on the one shown 🤔

collectorshowcase :

Show top

Big Mac :

Good lord, can’t make anyone happy in the comments. It’s a simple and effective tip,try it or don’t…. That’s it

CallmeMefford :

A scribe costs $4. Come on, man.

Codododo :

Not using the fence on a table saw is scary af to me

Alex Reyes :

Great tip! Especially for those just starting out and who may not have all the cool toys.

KyleDean123456 :

What’s the top look like? And how did you fasten that piece so it doesn’t just fall out?

Mario Sanchez :

ricvaughn0 :

Who measured for the cabinets.

user1778295799099 :

I would’ve had the factory extend the style on the cabinet so that there is no seam

I Drink & I Know Things :

So you didn’t use the fence because it wasn’t a straight cut, but still had the table saw that can’t really cut curves. Now instead of one gap, you have several? Invest in a bandsaw or rough cut it straight and then sand it to the line for a better fit.

sequoia1956 🇨🇦 :

Why not make the end pieces wider to allow for scribing

Brian Tolen :

use the guide on the saw gives you a straight cut no fishtailing on the back end

bigBhotdog :

Measure top measure bottom enjoy your line out with the level scribe that bitch on table saw

Ashmore Cabinets :

Great tip 👍🏽, everyone has an opinion... yes you can invest in other tools, take more time, make it even more perfect... but budgets and deadlines greatly come into play.

J.M. Heart :

Thanks

Mario Sanchez :

this looks better

angels0303rivera :

lol u could have just cut it regularly and just caulked that little bit

SimpleScribe :

Bro where is your Simple Scribe?

Smichy007 :

Or just cut straight and install, finish off with caulking for the cleanest look.

caseyrexsharps :

scribing knife is like $10, replace the pencil with the knife, benefits are pre scored cut line for cleaner cuts, and the tape gets cut too so you can pull the tape off the waste side to see your cut line easier. its absolutely not necessary, what you did works, but the quality of life improvement with the knife is fantastic.

Spad :

All the keyboard carpenters. Keep doing what you're doing sir! Those who know... know!!

Raul Calderon :

What's the size of the primary board that's the most important.

All of None :

This saves a ton of brain damage