wait till he discovers that the blade is sucking not blowing... 😲 ✌️
2026-08-30 16:34:14
205
Tazer :
put a washer under the motor mount on all 4 corners to get a little slack on the belt
2026-08-30 18:49:33
75
lpender1994 :
You gotta test it out man. I've been following along the whole way to see it on the water.
2026-08-30 18:26:56
145
JoeHorn :
You only live once. What a way to go out
2026-08-30 15:39:57
89
glen_wood_turner :
Longer belt with a spring tensioner might help.
2026-08-30 16:18:47
34
Hazy603 :
Did you bleed the brakes?
2026-08-30 17:30:27
36
myocastor4❌ :
Airboats absolutely suck in deep water, they are so easy to sink. You would have more fun in really really shallow water.
2026-08-30 17:01:10
9
DaveyBoyxxtha1Nonly :
use some thick washers under the motor mounts.. it will raise the motor so slightly and allow a bit less tension on the belts
2026-08-30 21:14:57
13
chris jarvis :
fully invested now you have to test it I would do it for you but I'm in the uk 😁
2026-08-30 16:02:46
16
CP :
Absolutely, you made a masterpiece. You must test it for your own sanity. You must see if it actually works, you’ll never forgive yourself if you don’t test it. 😂 You’ll be fine 😏
2026-08-30 18:42:20
6
Jones :
So early the video isn’t loading right. So excited
2026-08-30 15:30:01
40
chris.g.65 :
Don’t be a Nancy and test it 😂
2026-08-30 18:18:20
8
david❌ :
test it
2026-08-30 15:54:46
10
Brian Buckley :
Precise aerospace hammering
2026-08-30 22:45:07
6
Adam :
you did all the work! you gotta at least try it
2026-08-30 18:34:39
6
Dellinger Boys Adven :
Test it, I tested mine yesterday
2026-08-30 21:59:37
5
Dragon Master :
hell yeah...test it...but pay your life insurance first
2026-08-30 22:43:04
7
Mr. B :
I mean, what could go wrong! Run it.
2026-08-30 21:36:27
6
B-Bo :
Take it on the water already!
2026-08-30 16:27:32
7
Mike Keen :
Yes test it and make a foot throttle/gas pedal for it so when you get thrown out it will go into idle
2026-08-30 15:56:44
10
Kevin Jovanovic :
Yes test it!
2026-08-30 15:50:10
12
peteferrelljr1 :
Belts to tight =bearing failure 🥺🥺
2026-08-30 16:08:12
8
Paul Davies 🇬🇧📚👨🏻🍳 :
I am definitely one for just using safety squints but I think step one would have been, remove propeller and leave it off until everything else was working lol
2026-08-30 16:10:35
8
Jcoff12 :
Looks good send it
2026-08-31 23:08:45
2
Joseph Boulos :
yes test it
2026-08-31 10:41:41
2
To see more videos from user @thebarnbrothers, please go to the Tikwm
homepage.