Mckeevers Marine
Region: US
Monday 31 August 2026 20:11:38 GMT
24631
399
35
14
Music
Download
Comments
Beantown :
I’d start with the grey fuel line and go from there!
2026-09-02 13:26:04
0
ze3388 :
my yamaha 90hp 2 stroke is having the exact problem right now.
2026-09-02 01:10:30
0
ReadyRolls :
Clogged cylinder head cooling passages..
2026-09-02 13:14:13
0
Tanner Babb :
Sounds like it’s running bad also
2026-08-31 22:22:55
5
RamK :
hurry up we need part 2 ! 😁
2026-08-31 22:23:49
5
Scottrod2 :
Water not exiting fast enough. Heads and adaptor plate clogged
2026-09-01 23:19:19
1
ChrisLeone :
Make sure you have the 3 stainless washers(2 flat, 1 bent) that sit on top of the water pump impeller held down by that plastic piece. Those washers don’t come with the water pump kit and they prevent the impeller from moving up and down making it lose pressure.
2026-09-01 01:27:32
1
Michael Suarez476 :
Did you remove the thermostat and make sure that it’s not full of salt blocking the coolant passage?
2026-08-31 20:17:06
1
bryce._.j :
When you put the new water pump in it did you put a new housing
2026-08-31 23:14:03
1
Zombine :
Blocked exhaust plate with salt debris. Pull exhaust plates and cylinder head, clean it out and reinstall with new gaskets
2026-09-02 05:09:39
1
user2017629569198 :
there's a blockage in the water lines and or bad thermostat. your about to do a job that's not needed and cost a customer a ton of money. pull the thermostat and vinegar flush it
2026-09-01 21:03:15
0
sam :
Thermostat or poppet. Or salt buildup
2026-08-31 22:35:58
2
. :
Take the hose off and make sure there isn’t a blockage in the fitting. Failing that take the exhaust plate off and check the 90° bend at the bottom of the plate. Narrowest point in the water system and they always get blocked up. Mine had loads of little bits of old impeller trapped in it.
2026-09-02 04:36:25
0
bdids :
I’ll give you $100-$300 for the rooster tail things you make for the motors
2026-09-01 02:14:45
0
Blue_5.3 👑 :
My. 1986 black max xr4 I fought the same issue figured out was a blown head gasket
2026-09-01 15:54:47
0
BogdenBoats :
Trash in the block, head or exhaust plate.
2026-09-01 01:21:06
1
Train06 :
Powerhead
2026-08-31 21:57:39
1
WATER ZEDGE :
clean out the tell tale hole with a piece of wire, spiders or other insects get in and block water flow.
2026-08-31 23:00:21
2
Scott :
Go ahead and pull the heads and clean all of the water passages out. Been there done that with my 99 115.
2026-08-31 23:41:21
1
lancepippin6 :
Rubber grommet in the waterpump housing where the water pick-up tube goes into the waterpump housing.
2026-09-01 00:51:56
0
woolard.daniel :
Who the heck is on trailer duty!? Jeez, back the whole damn truck in why don't you! 😂😂😂
2026-09-02 03:30:47
0
Melvin Fockler :
Had same problem then I did acid flush and fixed it. On a 60 hp Yamaha
2026-08-31 23:11:59
1
To see more videos from user @mckeevers.marine, please go to the Tikwm
homepage.
