Checking to see if the compressor turns on while it’s running
2026-09-04 09:51:35
7
Branden :
I’m checking if the compressor is running or not. That’ll tell you if you can skip checking the relays, fans etc. and start looking for a leak.
2026-09-03 01:59:08
7
Little b :
Compressor engagement, if engaged, checking pressures and tracing from there (leak/clog) if no engagement, hooking up my scan tool and checking parameters (compressor on/off status, ac pressure sensor)
2026-09-04 05:34:12
2
el_patron.de.birria :
Making sure the a/c is on
2026-09-04 20:31:02
1
Ricky :
If the ac blows hot
2026-09-04 01:42:02
2
m34turm4k3rho3 :
Clutch operation the pressure
2026-09-04 17:10:17
2
. :
making sure that the ac button is turned on
2026-09-13 18:01:40
1
Gugar1 :
checking codes/pressure/status probably in that order
2026-09-04 15:06:30
1
BRAPPPP :
Check with a scan tool the pressure and compressor status
2026-09-04 05:37:30
1
Jesse :
I make sure the switch feels normal or light/message comes on when pressed, then I check to see if compressor is engaged then I go to checking pressures and go from there
2026-09-04 11:01:49
1
Noah :
The concern, you’d be surprised
2026-09-04 01:51:31
1
ConnorCVK :
Step one, verify, can’t tell you how often it’s actually nothing wrong and it’s just hot out… then check compressor, condenser for rock strikes, the pressures
2026-09-04 02:36:51
1
abcdef :
compressor clutch engagement. if its not, im using a screwdriver to try and spin the clutch to check for lockup. after that, hook up gauges
2026-09-03 15:18:56
1
MAVIN :
Check A/C pressures.
2026-09-02 19:59:36
2
نصف خبير سيارات :
ac gas
2026-09-02 19:57:46
0
frank :
first thing im checking is the ambient temp on the radio if its reasing 27c and its 90 out then the a/c wont kick on
2026-10-01 17:04:28
0
AzraelGuideTh33 :
always freon level. how do you know if the system is allowed to operate. second can be pids for ac request or ac allowed. third would be the clutch power and ground. usually always power. if the clutch doesnt have power and the pcm isnt grounding the relay then there is a reason. high side switch, low pressure cutoff, ambient air , evaporator temp ect
2026-09-26 15:03:42
0
owen563 :
Check if compressor is turning on, evac and recharge check for leaks
2026-09-22 14:35:15
0
wicksandwaves :
Ambient temp sensor
2026-09-21 18:11:07
0
W :
Service bulletins cause most of our issues are already solved
2026-09-21 11:09:23
0
j_k_n_y45 :
Outside air temp sensor
2026-09-20 19:23:00
0
Dzehver :
Well if "ain't got gas in it"... 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
2026-09-02 23:04:05
0
To see more videos from user @curtisagardner, please go to the Tikwm
homepage.