@mobile_mechanics: Could more, actually be better? 🤔#palmbeach #palmbeachgardens #westpalmbeach #boyntonbeach #bocaraton

𒉭𝔑𝔬𝔰𝔣𝔢𝔯𝔞𝔱𝔲𒉭 :

I want to be a mechanic but I don't have a way to start

veyclassic :

just so long as it doesn't spill over too much into the case it's sealing it's fine

Omar Khalid :

Why is no one talking about how handsome this man is?

Gerald :

I love mechanics who use so much silicone, they always gift me an engine overhaul job due to blocked oil pickups

Havu_honka :

Too much silicone will just ruin the threads

Fanatisk :

Norwegian mopeds are made of silicon

Illicit mockery | Hobby Gamer :

mechanics fee should drop to 20/hr when cleanings happening. js.

tuktuk67n3 :

how much per pic

… :

If it’s your car, any fix is a fix.

shawarma.muncher :

Usually yes but too much silicone applied on a gm truck oil pan will clog up the oil solenoid the feed tube and it’ll trigger a check engine light

￶￶ :

Taylor :

I do the bead the way it's supposed to be, but I do flatten and smooth it with my finger before applying. Not as much as the second clip, but also never seen it leak. More even mating, helps cover up any marring from removal as well.

LouieH98 :

It has a much lower chance of producing a seal. When I did my training with Ford they said to look at the silicone. If it gets stretched or smuggled the colour changes. It becomes a dull colour instead of its usual glossy look. Once that happens it won’t produce a perfect seal there will be cracks in the silicon either resulting in leaks immediately or a lower lifespan.

Kenneth :

as a pro, I use chlorinated brake clean and glue that shit on. Byeeee

HaloSphere Industrie :

So what’s the addy for the Fans?

Patrick Dougherty :

The only issue with adding heavy silicone is if some of it dialogues and gets stuck in the oil pickup tube it can starve bearings of oil had a buddy lose a motor like that.

El Solo Lobo Hobo Loco Mofo🙃 :

😂iv seen a strainer blocked because someone loaded a lot of silicone nd crank bearing ddnt recieve any lubrication

Mamut Rahal :

Well... I never used silicone and it doesn't leak too✌️

Keep_It_comedic :

until they put RTV where anaerobic sealant is supposed to be and it turns into charcoal in the corners

zack talley :

and to much silicon can cause oil starvation if the silicon makes it way to the pickup and other oil gallys you can see the silicon being pushed out the outside of the pan but a whole lot more can be pushed into the pan and brake off

flipflap :

a mechanic did that to mine and it leaking air should I be concerned

James Glenn :

Not much for silicone. I use gaskets and Permatex or Indian Head, depending on what I am doing

jimmy_218_ :

BOOBV🖤🥶 :

Damn🤣

RAMIX :

wahaahaahahahhaah