1. Home
  2. Detail

@khoudjedji045:

Sa Première dame K🌹 🌸
Sa Première dame K🌹 🌸
Open In TikTok:
Region: FR
Tuesday 22 September 2026 11:42:49 GMT
373
14
2
3

Music

Download

No Watermark .mp4 (0MB) No Watermark(HD) .mp4 (0MB) Watermark .mp4 (0MB) Music .mp3

Comments

fatim.hassane224
fatim.hassane224 :
Bonne fête à vous 🙏🙏🙏🙏❤️❤️❤️
2026-09-22 19:36:50
0
user5413352596631
user5413352596631 :
❤️❤️❤️
2026-09-22 11:56:34
0
To see more videos from user @khoudjedji045, please go to the Tikwm homepage.

Other Videos

CPU Solder Mask Repair — 4 Steps to Rebuild Peeled Green Oil Step 1 — Prep the pads Use a blade to scrape all bridged pads down to bare copper, then use a polishing block to level the pads and remove leftover solder. Make sure no excess solder remains on the pads. Step 2 — Clean off the dust Wash away all sanding dust with PCB cleaner. If you skip this, the cured green oil won't bond to the CPU — it will peel off with the stencil when you lift it. Step 3 — Apply the green oil Squeeze a small amount of green oil onto the CPU and spread it evenly with the stencil. Note: the stencil has a front and a back side — don't flip it by mistake. Step 4 — Cure it Cure under a 5W UV lamp. Thick coat: 8-10 seconds. Thin coat: 5-8 seconds. Key tips • Leftover dust = guaranteed peeling. This is the most overlooked step. • Always check the correct side of the stencil. • Adjust curing time to coat thickness — don't use a fixed number. • Green oil choice matters. Fast-drying types are hard to use for solder mask repair. #rabbitfix #repair #fix #phonerepair #PhoneFix
CPU Solder Mask Repair — 4 Steps to Rebuild Peeled Green Oil Step 1 — Prep the pads Use a blade to scrape all bridged pads down to bare copper, then use a polishing block to level the pads and remove leftover solder. Make sure no excess solder remains on the pads. Step 2 — Clean off the dust Wash away all sanding dust with PCB cleaner. If you skip this, the cured green oil won't bond to the CPU — it will peel off with the stencil when you lift it. Step 3 — Apply the green oil Squeeze a small amount of green oil onto the CPU and spread it evenly with the stencil. Note: the stencil has a front and a back side — don't flip it by mistake. Step 4 — Cure it Cure under a 5W UV lamp. Thick coat: 8-10 seconds. Thin coat: 5-8 seconds. Key tips • Leftover dust = guaranteed peeling. This is the most overlooked step. • Always check the correct side of the stencil. • Adjust curing time to coat thickness — don't use a fixed number. • Green oil choice matters. Fast-drying types are hard to use for solder mask repair. #rabbitfix #repair #fix #phonerepair #PhoneFix
#hhtcc4 #صالح_المغامسي #شعر_قوي #شعر_غزل #قصايد_شعر_خواطر
#hhtcc4 #صالح_المغامسي #شعر_قوي #شعر_غزل #قصايد_شعر_خواطر
والروح لا تحتاج إلاّ عُمرة وصلاة خلف ماهر المعيقلي ❣️❣️.
والروح لا تحتاج إلاّ عُمرة وصلاة خلف ماهر المعيقلي ❣️❣️.
Isten velem van!🙏🏽🍀❤️ #tthdorinaa #nekedbe #fyp #nekedbelegyen
Isten velem van!🙏🏽🍀❤️ #tthdorinaa #nekedbe #fyp #nekedbelegyen
#vellprest : bismillah moga aja ke ACC🗿 #clanuzumaki #fyp #masukberanda #presetalightmotion🎟️
#vellprest : bismillah moga aja ke ACC🗿 #clanuzumaki #fyp #masukberanda #presetalightmotion🎟️
#bienetre #sante #corps #astuce#douleurs
#bienetre #sante #corps #astuce#douleurs

About

Legal