@focageotech: Stop getting stuck on raw static data! Here is how to import your GNSS static files for post-processing in 4 quick steps. Whether you are running a RINEX conversion or loading raw binary files straight from your receiver, getting your raw observation data into your processing software correctly is key to achieving sub-centimeter baseline accuracy. Quick Workflow Checklist: 1. Export/Convert: Pull the raw observation files (.dat, .sto, or standard .obs/.2?o RINEX format) from your GNSS receiver or logger. 2. Setup Project: Open your processing software (e.g., Compass Solution, CHC Geomatics Office, Leica Geo Office, or TBC) and set your local datum/coordinate system first. 3. Import & Set Heights: Drag and drop your static files into the project. Double-check your antenna height and measurement type (slant vs. vertical to phase center). 4. Check Satellite Ephemeris: Ensure both observation and navigation files are loaded before running your baseline processing. What software do you use for your GNSS post-processing? Drop it in the comments! 👇 #LandSurveying #GNSS #SurveyingLife #Geomatics #PostProcessing
