Abraham Alzubaidy
Region: US
Friday 25 September 2026 19:33:54 GMT
6985
100
150
15
Music
Download
Comments
🇮🇶🦅༆𝓐𝓙 ๛🦅🇺🇸 :
Cascadia with a standard AirLiner rear suspension, the correct ride height target is typically 2-5/8 inches (67 mm), measured directly between tre axle stop on the frame and the top of the U-bolt pad.
2026-10-09 03:38:41
1
jayjayfabia33 :
Kingpin bro
2026-10-11 19:48:31
1
Mr5footer1.0 :
airbags ride height not rite..or bad drive tires..belts inside the tires
2026-10-11 20:19:12
1
DUPS :
Did you try both stir tires 🛞 balancing? That helped me .
2026-10-11 00:55:33
1
Moodhyk :
Sorry check back torque road happened to me change both habibi
2026-09-26 18:55:52
2
𖣂 DESTRUCTION⚖️ :
Cab mount/engine mount/cab shocks
2026-09-27 19:06:36
2
Tik tok :
Change ur steers, again, some are deffective
2026-09-27 16:52:20
2
Ghadir007 :
Leveling valve right height need to be adjusted
2026-09-27 04:16:22
3
ابو ايمن :
Probably the tires need balance
2026-09-29 11:27:29
2
abdulsafi300 :
Change tire and wheel from blue truck and drive and see
2026-09-27 19:07:11
2
ℳ𝓊𝓁𝓉𝒶𝓃𝒾 :
I have T680 Kenworth I’m going through the same bullshit as you i did change all the tires did change all the airbags did change all the shocks cap mounts bushings, did all the suspension bushing did change the torque rod and even the tire rod did the line like five times even paid a mechanic to take down the transmission and check for FreePlay and I’m still going through the same shit. Went to 10 different shops. Nobody can figure it out what the fuck is wrong with it and it’s a nightmare I can feel you. If you find a solution, please let me know.
2026-09-25 22:59:24
2
fazelahmadshayiq :
you need to change or rebuild the kingpins
2026-10-11 17:30:26
1
orgestthomollari :
Take the drive line to the shop to balance from the back of the transmission to rearends that’s all I did on mine and works??
2026-10-10 12:47:04
0
Ghassan Shamoon :
The level valve it’s not right and that’s why it’s got better when you have loads of
2026-09-26 19:57:22
2
Harley :
Check the level ball for the truck the driveshaft supposed to be straight. If you have any small angle in it is gonna make a vibration some trucks it has adjustment valve. Some of them does not if not, you have to change the valve and you have to make a adjuster.
2026-09-27 01:18:39
2
JD :
Tire brand
2026-09-28 15:34:07
2
Mark G :
Check the leveler in the back
2026-09-28 13:06:51
2
Ghadir007 :
إبراهيم هذا الفالف مال آير باك
2026-09-27 04:17:39
3
Brook Alemayehu Asfaw :
check your stability control electrical part.
2026-10-11 06:35:34
2
MPsinghCali🇺🇸🇺🇸🇺🇸 :
Check your Fifthwheel bushings if you find play in there that’s the problem i hope
2026-09-27 20:28:03
2
Khaled Suleiman :
I have the same problem with 2015 day cab after I change the shocks!!!!!!
2026-09-26 10:33:29
3
user792149425871 :
Don’t waste you money on it brother I have 2018 cascadia newer models 3hrs I changed everything even I drove 2023 newer models all have the same issues
2026-09-27 17:48:44
2
nidal :
spring
2026-09-26 16:00:58
1
David :
I’m invested I also have a 2018 125 I have the same issue I’ve spent a ton of money with the same results
2026-09-26 14:00:24
2
Saddam :
I find out one of my rear air bags leaked and not showing but I changed it the shaking and bumping got less
2026-09-25 22:05:59
2
To see more videos from user @abrahamalzubaidy, please go to the Tikwm
homepage.
