Kingdom Technical services
Region: NG
Saturday 26 September 2026 21:12:51 GMT
21458
1032
105
7
Music
Download
Comments
Jude Wishez :
Is low current my own
2026-11-07 13:34:49
0
𝗞𝗘𝗡𝗡𝗘𝗗𝗬𝗕𝟯 :
Faulty sensor
2026-09-27 07:47:52
3
cool man :
good evening engineer in the house have a problem similar like this I install an AC inverter LG 2 horsepower it we work like 20 minutes and the outdoor we off but the indoor will be working the outdoor will stop working like an hour before start working again please what could be the problem
2026-09-27 22:39:13
1
🌴H A S H I R🌴 /👁️\ :
Inverter and non inverter which one is good for single room ,
2026-10-17 22:16:09
0
@{Legacy :
this could be low current effect
2026-09-27 19:53:20
1
joshking :
display connection with the panel board
2026-09-27 06:57:48
3
Hottler cooling services🛠❄️ :
Sensor problem
2026-09-27 07:24:56
3
Elisco :
change The sensor or find another panel to check
2026-09-27 13:14:30
2
jonathandzirasah :
Change the sensor
2026-09-27 10:47:59
2
Justino :
check the voltage of this indoor and coble frm outside
2026-09-27 06:21:47
1
iamkbee :
this error does not have a code
2026-09-27 21:38:32
1
kwameosei691 :
voltage
2026-09-27 13:22:06
1
Alhaji bruno :
It the indoor has the problem
2026-09-26 23:03:05
1
oba_goddy1 :
chage the sensor ligt
2026-09-27 21:50:21
1
Yusuf jita boy1 :
is an error connection from the ware you can change the ware
2026-09-27 09:13:41
1
ugobestelectrical500414 :
Check the condenser
2026-09-28 04:23:34
1
de one and only maintenance :
the gas is leaking
2026-09-27 13:40:46
1
moses :
change themost
2026-09-27 14:13:17
1
EJIMA 🤝🦺 TECHNICIAN ✅✅✅ :
panel issue 😏
2026-09-30 10:24:45
1
Isaac Sekyi :
Communication
2026-10-14 22:47:20
1
keshcoolings_Ac guy in badagry :
Change the sensor and if the sensor it together with the thermostat wire pin change them all and the code will disappear…..some Ac can as well be displayed E8 too
2026-09-28 07:56:48
3
AC INSTALLER IN ABEOKUTA :
sensor faulty
2026-09-27 12:51:20
1
𝕬𝖑𝖑𝖊𝖓🤵🏾 :
Restart the Ac, open the inside unit top and use screw driver to restart the ac and the problem was caused by either the sensor cord was not connected in properly or maybe water was in it
2026-09-27 06:38:48
1
ICE KING 🧊❄🇱🇷 :
Check the connection on the inside unit and see if it’s the same connection on the outside unit
2026-09-27 00:36:31
2
Isaac Sekyi :
communication failure between the main control board and the display board,
2026-10-14 22:49:17
2
To see more videos from user @kingdom.technical, please go to the Tikwm
homepage.
