Mike’Car
Region: FR
Wednesday 07 October 2026 12:09:33 GMT
242408
2726
78
600
Music
Download
Comments
Pat :
who's got brake pads that slide out the caliper 🤨
2026-10-08 00:47:10
5
carlwhitfield28 :
No, no, no, if anybody follows these instructions, you will simply make a mess. If you try to push the piston back without the proper kit, you may damage the calipa and the piston at the same time. If you are not keeping an eye on the break fluid reservoir, you will spill break fluid. In the engine comparment, then you've got to find a way of draining it, you will create a larger problem. If you follow the instructions of this video clearly being told by someone who is not a mechanic, and is simply looking for browny points on here, do not follow these instructions. If you don't know how to change the brake pads on your car, get it to a garage and give the job to someone who does know.
2026-10-21 05:22:33
0
ianhunter8824 :
no copper grease
2026-10-08 08:39:48
9
MTB_lauchyyyyyy :
Or you could just take the caliper off and take the breaks off
2026-10-07 12:14:23
13
Ray Horn :
everything is easy if you know how .and if you have all the tools 🔧 expensive tools .I will pay a professional thanks. 👍👍👍👍
2026-10-10 03:42:16
3
Ray Ray 🐍❤️ :
Copper grease to prevent squeaks
2026-10-09 11:48:55
9
Shaun Regan :
dead easy,so simple
2026-10-07 21:12:15
13
stormyday :
only on the front wheels back is different
2026-10-08 01:08:16
1
Mid_life_ crisis :
unless you have an electric parking brake
2026-10-10 21:25:59
3
Reaper84_EUW :
That doesn't work for the rear with the caliper needed to be wound back👍
2026-10-07 13:43:15
1
markparker839 :
Yep easy on a lift- not so easy crawling about on the floor with the car on a jack and stand- hurt my back last time, never again!
2026-10-08 16:36:17
5
😈👻💍Jamie💍👻😈 :
Mole grips not pliers
2026-10-09 19:19:33
1
dan21 :
no copper grease
2026-10-09 20:05:12
0
Bill Croughan :
after taking off the disc, better clean the surface of the wheel off or they'll only last 5k miles
2026-10-08 15:50:14
0
boycider :
take lid of break fluid reservoir as u push pistons it forces up fluid...
2026-10-08 09:11:06
7
user1947635257598 :
clips missing
2026-10-09 07:52:32
1
pedrosanu :
Da...o sa ridic masina pe masa din sufragerie si ma apuc de treaba!😂😂😂
2026-10-09 05:35:08
2
Eb Norrish :
just gotta make sure the disks, pads and calipers are in mint condition lol
2026-10-09 20:10:58
3
Potstirrer :
those weren't pliers
2026-10-10 07:34:24
1
Jason.s🇬🇧🇬🇧 :
Didn't clean before new disc ,possible run out issues ,always use a dial gauge on the new disc.
2026-10-08 02:57:34
3
clayface72 :
unless stop start then good luck
2026-10-09 12:39:13
1
Aiken :
Everything is easy.but if you come across a stubborn disc that a nightmare
2026-10-09 16:29:27
1
Charlie :
Yes, its dead easy to get the screws out of the disk 😂
2026-10-09 06:12:58
1
Richard Banner :
Thank you , that’s £999 , have a nice day . 😁
2026-10-08 22:02:45
1
Lawrence b :
something wrong
2026-10-09 13:37:13
1
To see more videos from user @mike.bike03, please go to the Tikwm
homepage.
