dustys_daily_ on 📷
Region: AU
Friday 09 October 2026 21:40:19 GMT
3300
183
25
4
Music
Download
Comments
Adrian Duell710 :
you don't.
2026-10-10 07:17:25
0
Robert Angelkoski :
Straight bit of timber and lower your car down with the hoist, make sure your wheel hits the spot
2026-10-10 06:31:55
0
Scampy :
Lay it on the floor piece of timber and a car jack but u have to place the jack under something that will cause the pressure of the jack to go down not up if that makes sense
2026-10-09 21:43:04
5
Agro :
Yeah it’s not easy, cause it’s bent on the angle, 2 x planks of wood either side and then drive over it drive over two planks long ways might be easy
2026-10-10 04:52:02
0
andy :
You don’t most poeple throw that and put sliders on
2026-10-10 06:24:17
0
Downtown :
Heat it with a heat gun to around 160c and use a block of timber
2026-10-09 22:14:51
3
shittzngiggz :
Two boards either side with G clamps. It’ll flatten out between them. The curve will be much harder to roll back.
2026-10-09 22:27:07
3
Brian C :
Heat it up and shape it
2026-10-09 21:45:21
3
Robert Parker :
love how you say aluminum
2026-10-09 21:43:58
3
Tony :
Put even pressure on it
2026-10-09 21:45:03
2
🐉🪼🦒🕷🤙🏽 BetterRobert 🦥💙 :
Use a rubber hammer
2026-10-09 23:12:16
2
kendell :
bit wood some g clamps and some heat be sorted
2026-10-09 21:47:31
2
💢💥💫_Jax's_DaD_💫💥💢 :
press it out
2026-10-10 02:07:35
0
user7672018075259 :
You’ll need to heat it up very hot but not till melting!! Then use a plate over the bend and wack it with force and keep heating it as you go
2026-10-09 22:22:55
2
silver fox :
soft mallet
2026-10-10 00:59:22
2
georgie.boy360 :
Rubber mallet
2026-10-09 21:53:25
2
Michael :
Block of wood and a hammer. Find a block similar dimensions slightly smaller place it on flat surface then hammer the crap out of it
2026-10-09 21:48:41
2
Goldenblackman :
if i was their id do it fot you but....
2026-10-09 21:45:54
1
Blair Frater :
do you have a wreckers up there babe
2026-10-10 01:35:13
2
Jimbo 🏍️🏍️🏍️🤪 :
Peace wood inside it run a forklift truck wheel over it
2026-10-10 14:44:57
0
yellalot :
Press and a bit 2x4 if you got it or a bottle jack will do
2026-10-10 06:53:49
0
Dunkwil :
👌👌👌
2026-10-09 22:00:08
2
Kully SB :
😁😁😁
2026-10-09 21:49:58
2
Nicholas lourandos :
[Gesture OK][Gesture OK][Gesture OK]
2026-10-10 10:50:40
0
Gerri :
😳😳😳
2026-10-10 11:42:57
0
To see more videos from user @dustys_daily, please go to the Tikwm
homepage.
