@clement_racing:

twotone24v :

can you run the 4k gov springs with stock valve springs?

AK'S BUILDS :

garbage injectors.

Abryham Corbett :

that timing kit id basically a guess. your better off using a dial gauge on the pump cam lobe and doing it right. costs $20

0neslow5.0 :

If I were you I’d buy a triple disc or you’ll have problems

archangel_12v :

Yes and that’s 400 to the wheels. And the torque is probably around 900+

LeaninLLY :

You could do it a lot cheaper and probably make more power with a stock 3rd gen he351 or a cheap s362, nozzles on stock injectors and DVs, studs would probably be a good idea too

tuxedo_2g :

Where r I finding the guages for 200??

fastlanedieseltruckrepair :

Can you do same thing for 24v

Old_junk :

Highly recommend you do anything but ducky injectors! Had issues tryed to get up with the guy and took him almost 3 weeks to get back with me. I’m a reasonable person but 3 weeks is ridiculous to me! I Ended up buying dpp injectors in the time it took for ducky to reach back out! Couldn’t have my truck down that long I use it to work daily.

𝔅🕷️ :

buy a common rail and download 150hp. boom you’ve surpassed 400whp

SlightlyTwisted :

Guid :

problem is finding a 12v that’s not junk 😂

chestabigman :

Do non intercooled VE

Derek Couch :

id not recommend a 0 plate for anything street use. I ran a 100 plate with is the same except for a slight ramp on the bottom. spend a bit more and get a ddp plate. or a 10 if your cheap. save some cash and use a he351 used turbo for 400. no need for 0.014 inj at that level. stage 2 pdd or stage 2 ddp injectors be much better. if your cheap get a set of 5x12 ducky if you dont mind smoke constantly. dont forget the afc spring. 18* timing a set of delivery valves be the next step

John Walker :

i’ve got a 0 plate, maxed out pump adjustments, blocked waste gate, 191 delivery valves and my truck has become an absolute monster! it’s a c&c truck and with a brand new clutch HD replacement from auto parts it blows right through it 😅 i definitely didn’t expect the clutch not to hold with such small mods

Matt :

Where did you find guages for $200?

Abryham Corbett :

an hx35 is pretty decent out to 350-400 if you keep the air charge cool. he351 rebuild isnt very much and does even better