Check all your wiring like your power connected to the battery and your ground they could all be lose and move making it go into protect
2026-10-17 17:06:01
0
slammed4.6 :
If your dvc, make sure your wires bridging them aren’t shorting , I just dealt with that
2026-10-17 18:43:55
0
✮⃝👤 :
it's a shitty skar amp is why 💀
2026-10-17 13:48:05
4
ShowMeWhatYouGot :
I'm gonna be really vague and say you have a short in your voice coil.
2026-10-17 15:47:45
1
:) :
no info is given. What’s the final load, what’s the wiring setup looking like, what is your gain set to? All of this is helpful
2026-10-16 15:54:30
51
notyouraveragegrampatruck :
either bad ground or your remote wire is lose i had a similar issue a while back
2026-10-16 16:32:08
25
100%Human🦆 :
ground.
2026-10-17 17:47:06
0
Third Coast Electronics :
Check your ground and resistance load on speaker lines.
2026-10-17 01:07:06
0
zachary_ferrell :
That was happening to me and I changed my fuse and it started working
2026-10-17 04:01:46
1
Justin :
Check ground. I also just replaced my RCAs and it fixed it.
2026-10-17 10:18:15
1
Ian :
Check your ground where are the wires connected, is it clean? I’d recommend doing a round of sandpaper on wtv metal
2026-10-16 17:23:07
8
bigdaddyb :
99% of the time it's a bad ground
2026-10-17 15:41:18
2
ev.mcmuffin :
I had this happen with a multi channel once and it was js a bad amp ngl bc I got a new one didn’t change anything and it worked
2026-10-16 19:01:40
0
peteer391 :
what are those T taps connected to? because if that is your ground no good, even if its your speaker output or input no good! that's why
2026-10-16 21:08:03
0
SocketInMyPocket :
skar amps are trash, subs are good
2026-10-17 12:24:32
0
💔GHOULBOIICLIQUE💊 :
I’ve had these issues all the time with the skar 1500 to amps there bad for it I would recommend a new amp
2026-10-16 20:22:15
0
peterrabbit601 :
I need more information fam I need to see everything
2026-10-16 21:00:48
0
⃟ :
Turn your gain down
2026-10-16 22:25:21
0
່ :
what is your omh's, what it your power use and keep all your settings on the amp at the lowest and don't use bass boost
2026-10-16 15:42:31
1
JOJO :
Needs tuned or better ground or thicker wire
2026-10-16 20:26:52
0
Braylen :
Sub is cooked
2026-10-16 23:22:56
0
Brayan :
Everything used to work and one day they decided no to anymore, I changed out the amp already and tried a buddy’s setup the subs are good. Ground is on bare metal I’m leaning more into some rca converter is probably bad
2026-10-16 23:16:44
0
Sparky :
Just had the same issue i wired the subs incorrectly double check and just make sure everything is nice
2026-10-16 19:38:33
0
Bumpin :
Most likely your impediance I believe skar amps are only stable at 1ohm, if that’s not your issue your power and ground are touching somewhere.
2026-10-17 00:45:01
1
Dal :
If the subs worked at one point you could’ve ruined a coil via clipping, happened to me
2026-10-16 20:12:53
0
To see more videos from user @braya_2x, please go to the Tikwm
homepage.