Drake Fleck
Region: US
Saturday 17 October 2026 22:00:00 GMT
61894
4488
59
29
Music
Download
Comments
Dan Chapeski :
Just buy a second combine, then leave one set up for each type. I mean, I do it all the time when I play Farm Sim. No biggie!!
2026-10-17 22:31:36
166
Kris Parle :
Don’t change the rethrasher for soybeans. It stays in corn, that’s straight from JohnDeere
2026-10-18 00:52:58
13
Jacob Weber :
Almost identical for our 9770sts I figured it wouldn’t changed a lot more with the s series
2026-10-19 04:39:42
0
Chaz Ricard :
One thing i noticed you messed up was not letting dalton run the combine
2026-10-18 00:03:50
21
Bucky :
we never touch the feed accelerator and get along just fine.
2026-10-19 02:14:38
0
The3wildkidz :
Have never changed rotor gears on s7 combined except small grain
2026-10-17 22:53:51
7
Corey Jacobs :
We don’t move the accelerator belt. Works great
2026-10-19 02:44:56
0
k.evans6.9 :
Where y’all from. Corn before soybeans is unheard of unless it’s wet corn
2026-10-18 14:53:34
3
@pelfrey18🌽🌾 :
Got to have that cob deflector down or you’ll eventually destroy your chaffer by the chopper throwing cobs back into it. Ask me how I know. I always leave my rotor in 1st gear with Estes concaves. 350-410 threshing speed with corn and 380-420 with beans. Depends on the time of day and moisture
2026-10-19 02:01:00
1
McMurray :
Don't forget the cob deflector,
2026-10-18 17:06:13
3
coach_z7 :
As a fellow Dalton I just came to say you HAVE to let Dalton drive the combine man
2026-10-17 23:51:18
7
Jake Michael :
Why do you change the feed accelerator speed on a 780? Deere changed the way it feeds into the rotor on a 700 series and you are not required to run it in high like the 600 series machines.
2026-10-18 10:08:22
5
Evan Funk :
We leave rotor in 1 and then we leave are feed accelerator in slow but we also do seed beans help with less splits
2026-10-18 01:23:37
3
tc :
I’ve always left the rethrasher on corn since a grain of soybeans is pretty much the same size as a grain of corn. Small grains refers to something like wheat
2026-10-17 22:57:27
10
MCCLOSKEYMITCHELL :
leave the rethresher in corn position, change your crop deflector and take the spacers out on your grates
2026-10-18 00:59:07
5
DustinNash :
We leave our feed accelerator in high. Re thrash in corn
2026-10-18 02:50:32
2
user9756503191436 :
I’m gonna try that next time. My chopper spreads too much to outside
2026-10-18 00:33:17
2
K&K Farms :
Try running your fins left on the right side and the right on left. Opens up the center then chokes it down to get to the outside.
2026-10-18 05:04:38
2
Conor Laska :
Leave the rotor in first, run between 300-450, and up to the 400s when they get tough, you’ll be way gentler on the beans
2026-10-18 04:12:48
2
JOE🔙EOJ69 :
I was wanting to see you do the that pain in the ass belt and shield 😣☹️
2026-10-18 02:12:27
2
jhaycox123 :
13 mm take fins off so you evenly distribute the discharge. Change rotor from first to second. All seems prefect except kips not running the combine 😂😂😂
2026-10-18 02:15:46
2
Jesse Ripley :
possible separator grate spacers
2026-10-18 19:05:49
1
Coltonv_51 :
Forgot crop diverter
2026-10-18 12:26:57
1
hb :
running a draper head always leave feeder house drum up and never move it but if running old auger flex head lower it no need to lower just leave up and run all the time
2026-10-17 22:23:52
4
baller9011 :
Why change feed accelerator and why change rotor speed?? All we do is chopper speed, chopper knives and we do change cob deflector. Know lots of personal preference but we do it from dealer recs
2026-10-18 00:27:09
2
To see more videos from user @dr_fleck, please go to the Tikwm
homepage.
