Woodify
Region: GB
Saturday 17 October 2026 23:44:49 GMT
9505
283
24
14
Music
Download
Comments
user3866632826911 :
if wood doesnt rot.ya dont get any work.nobody see yr effort just the price.
2026-10-19 00:42:34
0
Oli :
In my humble opinion, that is perfection 👌🏼
2026-10-19 06:28:10
0
Bush :
That doesn't work the holes will get blocked up by spiders living in the holes I've seen it happen loads of times over 50 years as a bench joiner.
2026-10-18 04:21:28
10
Joseph Christian Phi :
Very good 🫡
2026-10-18 16:11:49
1
your name here :
maybe add inserts into the hole ? just to try and keep the water out the grain?
2026-10-18 14:56:11
1
TheLostWanderer :
I love the quality of work. it's amazing! but each hole you have drilled has created a point where water/rot can track up the grain. I doubt that there is enough ventilation to dry the groove out so it will be damp most of the year. If I HAD to have a bottom rail I would slot the top of the rail and glue in a sliver then slot the bottom of the lining boards for the glued connection. You never want moisture going through a piece of Joinery
2026-10-18 07:30:38
2
Wickster :
Absolutely perfect quality job
2026-10-19 05:31:54
0
octy mocty :
tung oil make wood last years
2026-10-18 08:24:04
2
Mitech Joinery LTD :
The thought that’s gone into this is brilliant, and your craftsmanship is of the highest standard—not that you need me to tell you! 😁 You asked what we think, so my preference would always be a solid bottom rail, as you’ve used, but with an open, angled rebate. I think I mentioned you in one of my videos about this. For hardwood gate makers using a trench, your detail is a must in my view, provided they’re not using a film-forming coating. With a film-forming finish, I’d go a step further and use an open, angled rebate to help water drain away. It’s not quite as tidy-looking, granted, but in my experience it performs better over time. Again, brilliant work. Love what you’re doing. 🙏
2026-10-18 07:29:42
2
Caberwald :
Practicalities > aesthetics. It doesn’t matter how well you think you can seal that the water will get in to the grain and destroy the door. Much better to have a sloped rebate so the water can run off. If you have to have a high side and fixed through with stainless steel screws then so be it.
2026-10-18 10:29:29
2
Data Dan :
only time will tell but no one can't say you haven't tried. looks quality fella
2026-10-18 05:33:20
2
T.S.P.B. :
seal the joints with tar. . .
2026-10-18 05:14:57
1
Zack :
You’ve got to do it the other way round the groove in the panelling
2026-10-18 18:25:38
1
philippe mourtoux :
Bonjour cela faisait longtemps que je n’avais pas vue un travail aussi bien réfléchi bravo 👏👏
2026-10-18 10:06:18
1
Mark Richards :
it's a fair argument about the design, great effort in my opinion 👍
2026-10-18 07:27:48
1
Nicky Baxter :
Skills !
2026-10-18 01:28:16
1
.tonylikesgym :
Rotting from the inside out with this design!
2026-10-18 13:56:45
1
Dock Zwo - Die Tischlerei :
👌👌
2026-10-18 11:37:14
1
wood pecca :
🥰🥰🥰🥰
2026-10-18 09:22:11
1
To see more videos from user @woodify62, please go to the Tikwm
homepage.
