@whttigr8: They are ready for Youth Dress up Night at church! #FallTime #AutumnFun #HarvestIsHappening #fyp

whttigr

Open In TikTok:

Region: US

Sunday 25 October 2026 23:47:21 GMT

125

2

0

1

Music

Download

No Watermark .mp4 (1.15MB) No Watermark(HD) .mp4 (0.65MB) Watermark .mp4 (0MB) Music .mp3

Comments

There are no more comments for this video.

To see more videos from user @whttigr8, please go to the Tikwm homepage.

Other Videos

#CapCut

Đây đây quân sư cần ten của toyyy đêyyy nè @Diệu Linhh #lamvyda #capcut #lamvydaofficical #trending #xuhuong

Đây đây quân sư cần ten của toyyy đêyyy nè @Diệu Linhh #lamvyda #capcut #lamvydaofficical #trending #xuhuong

Thân 1 hôm 🤓@QuỳXuống(Duck) #CapCut #pubgmobile

Thân 1 hôm 🤓@QuỳXuống(Duck) #CapCut #pubgmobile

$Ever noticed your angle grinder (or any power tool with a motor) draws a high current when you first switch it on, then quickly drops to a much lower running current? For example: 26.8A at start → stabilizes at 5.6A. This is completely normal and is called inrush current (or starting current). Here’s why it happens: When the motor is at a complete standstill, there is almost no back-EMF (the voltage the motor generates that opposes the supply). At that moment, the only thing limiting the current is the low resistance of the windings. The motor also has to overcome the inertia of the rotor and grinding wheel. As a result, the current can surge to 3–7 times the normal running value for a fraction of a second to a couple of seconds. Once the motor reaches speed, back-EMF builds up, the effective voltage across the windings drops, and the current settles to the steady running value needed to overcome friction and the actual load. That’s why a tool that runs happily on a 10A or 16A circuit can still trip a breaker the moment you switch it on — the brief surge is what the breaker reacts to. #insrushcurrent#highstartingtorque#clampmeter.$
Ever noticed your angle grinder (or any power tool with a motor) draws a high current when you first switch it on, then quickly drops to a much lower running current? For example: 26.8A at start → stabilizes at 5.6A. This is completely normal and is called inrush current (or starting current). Here’s why it happens: When the motor is at a complete standstill, there is almost no back-EMF (the voltage the motor generates that opposes the supply). At that moment, the only thing limiting the current is the low resistance of the windings. The motor also has to overcome the inertia of the rotor and grinding wheel. As a result, the current can surge to 3–7 times the normal running value for a fraction of a second to a couple of seconds. Once the motor reaches speed, back-EMF builds up, the effective voltage across the windings drops, and the current settles to the steady running value needed to overcome friction and the actual load. That’s why a tool that runs happily on a 10A or 16A circuit can still trip a breaker the moment you switch it on — the brief surge is what the breaker reacts to. #insrushcurrent#highstartingtorque#clampmeter.

#skychildrenofthelight #skygipvn #NgàyTinhNghịch

#skychildrenofthelight #skygipvn #NgàyTinhNghịch

Antwort auf @karim_koyemist bin aufgeflogen 😟 habe aber legit einen krassen gehabt

Antwort auf @karim_koyemist bin aufgeflogen 😟 habe aber legit einen krassen gehabt

About

Robot
API

Legal

Privacy Policy