Sc.automotiverepair
Region: US
Friday 30 October 2026 22:23:43 GMT
6145
74
164
4
Music
Download
Comments
j_gt_z :
Blow shop air into the hole bro
2026-10-31 03:09:06
17
anthonyfox203 :
it's stuck wd man wd40. soak it long needle nose, spin it free and pull out
2026-11-01 01:52:59
0
Jerry :
this will do it.
2026-10-31 02:04:52
11
David Bush700 :
3 inch wood screw and needle nose pliers 👍
2026-11-01 01:23:04
0
user8253994572699 :
Try a metal coat metal
2026-11-01 01:38:36
0
douglasescobar494 :
Remove the valve cover and install new bushings!!
2026-10-31 21:10:20
1
Jeffrey :
Get you one of them as curved pics works absolute wonders they’re gonna tear it up, but that’s the point
2026-10-31 20:53:57
0
Edgar :
This happened to me bro. The only way I got it out was a 120° ish hook pick that i was holding with needle nose pliers. It fell back in as soon as I got it to the top but after the second time I was able to get it out. You need to get between the spark plug and the boot. Try to stab from the inside-out and pull it up
2026-10-31 03:43:30
5
Dust_demon :
Bro this happened to me with a inline 6 engine I got it out with some long needle nose pliers from Harbor freight but I also put heat on them and did a 45° Angle halfway. That way I could get it into the Spark plug socket area because I was next to the firewall.
2026-10-31 08:28:25
0
Tommysmind1 :
Just flip the car upside down and it will fall out common it’s simple
2026-10-31 03:07:53
7
Larry Parker93 :
Spray with wd40
2026-10-31 21:13:36
1
Mar❌️ Legacy :
pull the valve cover out. last option.
2026-10-31 13:07:31
1
Stingray1word :
Search extra long “Dental picks “ harbor freight should have it.
2026-10-31 13:09:23
0
Chance Token :
Hot coat hanger normally works let it cool before pulling it
2026-10-31 19:49:16
1
@statereff :
use a vaccum
2026-10-31 02:55:01
0
CHULO_SIN_H :
Try to break in to smaller pcs use a shop vac with a pc pipe small enough to fit in there tape the pipe to the hose of the shop vac same thing happened to me in my transit van
2026-10-31 01:45:12
3
Brian the mechanic :
I have a harbor freight socket i cut teeth into like a hole saw. blow the rest out with air
2026-10-31 09:27:42
0
anthonyfox203 :
wd40 and air gun. first time in see
2026-11-01 01:51:27
0
Ranger Danger ivan 1620 :
Use a long wood screw and thread it into the rubber then pull the screw should yank it out
2026-10-31 18:44:27
1
Montana :
Lil gas in there or brake cleaner
2026-10-31 00:44:03
2
frogster84 :
Shop vac
2026-10-30 22:36:01
2
hunndiddybopbopp :
Just break it in pieces, and used a vacuum to get all of the piece's out
2026-10-31 04:39:04
1
. :
Torch your socket cheery red, put it down into the spark plug get it a little loose, leave it alone for a few minutes, let it cool down and take it out after it’s cooled down
2026-10-31 05:59:41
1
shampoo is better :
heat up the spark plug socket really hot tap it down all the way let it cool for a few seconds and it will take it all out and the plug. Just vacuum the rest out
2026-10-31 05:16:10
1
cat :
nevk down a vaccum cleaner hose and then blow with high pressure air
2026-10-31 04:37:32
1
To see more videos from user @simmyyautoservice, please go to the Tikwm
homepage.
