Royce_Renovations
Region: US
Thursday 05 November 2026 22:34:52 GMT
7886
201
44
1
Music
Download
Comments
Rodney :
he didn't back butter. you're using a hammer drill so it was adhered just fine
2026-11-06 13:30:10
0
sprky84054 :
Ask yourself “if this were my house, what would I do?”
2026-11-06 21:07:51
0
Victor :
depends did they pay you in full
2026-11-06 19:10:54
0
95mark :
You should be OK. The mud bed is not the problem. The tile adhesion into it is.
2026-11-06 18:22:20
0
joshua :
ive done a job were tiles i installed had to get demod for a later remodel. I back butter everything and directional trowel, still tile popped off clean
2026-11-06 15:52:58
0
StrikeForce :
Use self leveler
2026-11-06 02:09:37
3
Gbooth :
I say tear it out unless u are gambling man.
2026-11-06 02:58:57
3
𝔏𝔬𝔲𝔡 & 𝔭𝔯𝔬𝔲𝔡 🇺🇸 :
Can you? Yes. Should you? No
2026-11-06 04:12:32
6
Zak :
You just made a comment on your previous video about doing work correctly. Reusing the mud bed isn’t.
2026-11-06 02:22:00
2
Tim Hill :
Rule of thumb…. If the tiles were not installed correctly, the rest of it is installed the same way…. Start over.. with that being said. I’d the substrate is not cracked or busting out in chunks.. then it’s pretty solid.. send it…. But if the tile fails down the road.. it’s probably due to the substrate not being replaced.
2026-11-06 14:05:54
1
86K5 :
Prime it and self level it should be good to go
2026-11-06 04:07:36
1
WillieBChillin :
Grind smooth, self Leveling/skim coat. Good to go.
2026-11-06 04:27:08
1
FloridaGrammy :
As long as you level the floor and there are no cracks you should be okay.
2026-11-06 01:32:19
1
Blain Schmeck :
Uncoupling membrane on top and send it!
2026-11-06 03:45:18
1
B :
Depends on if you are a gambling man
2026-11-06 02:42:18
0
Thomas Terrell :
following
2026-11-05 23:31:41
0
coachvrm6kh :
Yes as long it it’s mostly level -
2026-11-06 04:21:43
0
Roz24 :
Bounce a golf ball on it? Isn’t that the test 😂
2026-11-06 04:43:15
0
Dadbod :
I’d scrape off the white coat because that’s the part that already failed to a degree and you would be able to determine from that if it’s good or not and then pour self leveler in about 1/4-1/2” depending on how much room you have and your good
2026-11-06 06:31:49
0
Monica :
Contractor or DIY owner?
2026-11-06 00:32:17
0
user4932751638559 :
So the first guy shortcut the job and you are pointing it out then you want to shortcut it also?
2026-11-06 03:49:29
1
FireWalker116 :
Thin set is not a skimcoat/patch use the right products. Thin set shrinks as it drys causing cracking when too deep. Grab an actual patch it has less shrinkage. What really happened was the installer was slow and the mortar “skinned over before the tile was set into it.
2026-11-06 05:03:05
0
To see more videos from user @royce_renovations, please go to the Tikwm
homepage.
