coctibleivory1234
Region: GB
Sunday 08 November 2026 09:19:35 GMT
115664
577
34
22
Music
Download
Comments
Jim bop :
drill into the wall below the lintel 🤣
2026-11-08 10:24:48
4
user4533628409949 :
Rubbish use Texmec screws 🙄
2026-11-09 00:02:52
0
robert.mccarthy47 :
Cobalt drill bit will piss that
2026-11-09 15:56:51
0
paul phillips559 :
dont touch the end ofthe drill bit immediately after drilling 🤦♂️
2026-11-08 22:57:41
4
tellio99 :
Just drill sideways. Much stronger fix anyway 🙄
2026-11-08 21:37:54
0
user2619521809a :
Just use self drilling screws. Takes 2 mins. Secure tight fit.
2026-11-08 22:50:40
0
Dean Smith :
This was a hard watch to be honest. Self tapping screws (3.5 x42mm) does the trick combined with an impact driver. Can install a blind in 15 minutes 🤷♂️🤷♂️
2026-11-08 18:48:01
2
ADP :
Self drilling screws if a metal lintel or buy sds for concrete.
2026-11-08 19:19:43
1
Joe King :
I use a self drilling screw straight into the lintel ,quicker and less mess also set the brackets 50mm off the windows so the blinds don't hit the window handles 😏
2026-11-08 13:32:36
1
SmellyPotato19 :
Either self taper or just get the sds out
2026-11-08 18:43:51
1
Gazboy on Tour :
Absolute nightmare. I ended up getting someone in and paying £40 for them to do it.
2026-11-08 18:41:27
1
mickyboy :
I had this problem once,bought some makita drill bits,they were awesome.
2026-11-08 15:49:11
1
Carl_Precept_No.530 :
New drill bit. Metal lintels are surprisingly soft, you should go straight through it.
2026-11-08 15:37:34
1
richardhoughton16 :
really, do you need the clamp
2026-11-08 12:32:58
1
school of hard knocks :
or just use a self taper ?
2026-11-08 16:45:12
1
andrewwalton875 :
just use tec screws job done its never coming lose
2026-11-08 20:48:27
0
Dad :
dewalt not upto the job[Big LOL]
2026-11-08 21:28:56
0
robertgill505 :
I have to hang five blinds an hour,and I don’t do that.Self tapping screws does the job
2026-11-08 11:58:37
0
jimthornton07 :
use a smaller drill bit, then use the size you want, it's called using a pilot drill bit and is common knowledge in engineering terms.
2026-11-08 12:50:03
7
george the spider :
How about not drill the lintel…
2026-11-08 14:44:38
0
ergplummy :
What's a "linh'ul"?🙄
2026-11-08 14:58:03
0
steve.raw123 :
buy a cheap.sds drill. use a chuck and adaptor and 6mm hss bit. cheaper than a milwankie 12v
2026-11-08 18:59:06
0
Sparks_37 :
Self tappers. Job done.
2026-11-09 09:21:13
0
KB :
or buy fast fix blinds!!
2026-11-08 15:03:24
0
Mark Rich :
Sds like butter
2026-11-09 00:47:07
0
To see more videos from user @coctibleivory1234, please go to the Tikwm
homepage.
