JAMSI Online
Region: US
Tuesday 10 November 2026 02:39:20 GMT
31643
2001
20
11
Music
Download
Comments
nickdeutekom100 :
So you can now take 3k off the head and be right at original
2026-11-10 03:08:33
30
danapickering493 :
couldn't you just take the difference off the top of the new piston if it stuck out the amount that it was decked? just asking.
2026-11-12 16:43:11
0
FungalMath :
Sincere question: Why would the fix for a protruding piston be offset boring the pin bushings instead of just decking the top of the pistons?
2026-11-11 23:24:45
0
yhatzee89 :
Is it ever possible to machine the deck and the pistons at the same time?
2026-11-10 02:58:05
10
Frank Mac NICOL :
3.152 pistons with 3.6 bore normally have pistons topped. Very seldom that they are under deck.
2026-11-10 06:48:43
1
David :
pistons were available in the UK until JD bought it only to shut it down
2026-11-10 17:03:51
1
rubygonza8 :
Measure twice cut once. Always check your work.
2026-11-10 04:48:33
1
ᴠᴏʟᴜᴍᴇ : ▮▮▮▮▮▮▯▯▯ :
Never trust always check. Big money mistake if not 😆
2026-11-10 06:34:04
1
OnDeFritz :
You said trust the aftermarket lol
2026-11-10 04:56:08
1
joeyhill188 :
measure twice cut once
2026-11-10 10:57:20
1
realistic homer simpson :
wonder what the ones on here are like
2026-11-10 22:19:22
0
🤠 County Antrim Lad 🤠 :
Just after doing one up that’s been at the farm since new .
2026-11-10 15:07:03
1
Carlos Trejo :
What Watch are you wearing ?
2026-11-10 03:11:38
2
Russell McNeill Engineering :
It takes two men three days to start these. Absolutely terrible starting engine with any wear in them. The similar engine in the 35 is a great starter, trust Ford to take a Perkins engine and make it hard to start
2026-11-10 20:41:34
1
Giatras :
😁😁😁
2026-11-11 11:58:02
0
user8325208847540 :
😳😳😳
2026-11-11 09:39:24
0
clamo Joat :
Chinese out of spec parts is Y
2026-11-10 06:40:39
1
To see more videos from user @jamsionline, please go to the Tikwm
homepage.
