Dave's Auto Shop
Region: US
Wednesday 10 January 2024 21:57:04 GMT
350358
20303
442
368
Music
Download
Comments
Sleeping Wolf :
50 grit sand paper would fix that pad
2024-01-10 22:04:49
317
Drodrr :
I agree with what you are saying but sometimes customers are on a budget so you can just sand the pad surface flat.
2024-01-10 23:39:09
47
Jimnorth :
But the pads are not as hard as the rotor so I don’t understand how it would cut gloves in the rotor
2024-01-11 01:30:51
17
Kyle Harris :
I agree I always change both, but technically contact area in sliding friction doesn’t change friction force,clamp force and friction coef only matter
2024-01-11 03:49:12
11
Jmoore1301 :
I’ve never put old pads on a new rotor but if the old pads wore flat, I’m sure as shit putting new pads on old rotors
2024-01-11 03:43:40
5
Fred Sanford :
i just rub them on the ground a little
2024-01-10 23:22:37
60
Kulbreze :
Turn the rotors, replace the pads. The rotors have limits, beyond limits, replace.
2024-01-11 04:22:51
19
Scott :
Sooo pads are strong enough to wear out metal ?
2024-01-11 03:46:55
17
Tj Little :
Always change rotors and pads at the same time.
2024-01-10 22:07:03
6
Dilbertisreal :
1989 Toyota Supra. 241,000 miles and factory rotors. Never Been turned. Just pad change
2024-01-11 02:56:53
8
Glen Straubhaar :
A shop of anykind cannot afford to cut corners on brakes. Its an issue of liability.
2024-01-10 22:43:21
3
Scubasteve79 :
never change my rotors pads only and my brakes always work great. now if the rotor is really gouged like that I would change them lol
2024-01-10 22:12:41
8
Jaden :
do you guys also resurface rotors? or just replace at your shop? curious since resurfacing no one really does anymore
2024-01-10 22:06:10
3
slydoggg :
Dave for President!
2024-01-11 03:02:35
9
jhugff hgfvjj :
belt sander fixes that freak quick!!
2024-01-10 22:22:39
7
Slowing time1 :
Pads aren’t that expensive! Just by
2024-01-11 00:27:56
18
Michael Adams :
Exactly!
2024-01-11 01:59:24
3
klumaverik :
wear gloves damnit! lol
2024-01-16 11:08:47
0
Golt Electric⚡️ :
Dude that was great visual
2024-01-11 03:37:16
4
Lance :
A quick tap on the belt sander and you are good to go.
2024-01-11 05:30:16
4
maxdixson113 :
I did this for years with no major problems. NEVER had a rotor turn
2024-01-11 03:37:19
4
Paul Conklin :
I love this page I have been in the field for 12yrs and rebuilt at a Ford dealership for 6yrs and the amount of knowledge I have gained from watching
2024-01-11 14:28:16
2
madjenko :
I always replace both for fun
2024-01-10 22:44:06
3
TwinHCarbs :
Plus how u going to warranty that? That’s doing half the job. I’m with ya. New rotor new pads new caliper new pads etc.
2024-01-10 22:49:22
4
To see more videos from user @davesautocenter, please go to the Tikwm
homepage.
